Home
 
Anatomy of a Needle
 
Serger Needles
 
Serger Needle Plates
google5993c5666b5daeec.html
Serger (overlock) Parts
   
SergerThreadGuideHolder2.jpg Singer Serger/Overlock Thread Guide Holder #412519
$24.95
(550346)(412761)
Thread guide holder for 3 or 4 thread sergers.
Comes with attachment screw, telescopic rod and upper thread guide bar.
Fits Singer: 14U34B, 14U234, 14U234B, 14CG744, 14CG754, 14SH644, 14SH654, 14SH744, 14SH754 and 14U544
Elna: L5D
ADD BASIC S&H
 

   
SingerSpoolCap14U546894.jpg Singer Spool Cap 14U Series #546894
$3.95
Spool cap for Singer 14U series sergers.
Allowes the use of thread (regular spools) other than cone thread.
ADD BASIC S&H
 

   
SingerConeHolder14U546893.jpg Singer Cone Holder 14U #546893
$3.95
Cone holder for Singer 14U series serger.
Slides onto the vertical spool pin to help stabilize cone thread.
ADD BASIC S&H
 

   
SregerConeHolderB7.jpg Serger Cone Holder (Bin B-7)
$3.95
Cone holder fits most models.
Helps stabilize cone thread
Fits 1/4" diameter spool pin
ADD BASIC S&H


   
SingerSergerFabricSeparator.jpg Singer Serger Fabric Separator #376629
$14.95
Fits models with differental feed.
Allows the bottom layer of fabric to gather while keeping the top layer flat, all in one stitching overedging (finishing) and cutting process.
Works best with light weight soft fabrics.
Attaches to the plate where the top seam guide normally goes.
Comes with directions
ADD BASIC S&H


   
SingerSergerAdjEdgeGuide.jpg Singer Adjustable Serger/Overlock Edge Seam Guide #281465
$9.95
Fits Singer Sergers: 14U32, 14U32, 14U44, 14U46, 14U64B, 14U85, 14U234, 14U284, 14U344, 14U354, 14U444, 14U454, Q5 and other 14U series with mounting hole in the cover plate.
Includes edge guide, washer and set screw.
Use to help control the fabric as it enters the stitching/cutting area. Also helps when attaching ornamental trim and blind hemming.
ADD BASIC S&H


   
SergerCylinderCover2.jpg Singer Serger/Overlock Cylinder Cover #412706-002
$19.95
(412706-100)
Snap-on cylinder cover with spring.
Fits Singer: 14U12A, 14U22A, 14U52A, 14U13A, 14U23A, 14U53A, 14U32A, 14U34B, 14U44, 14U46B, 14U64A, 14U65B, 14U85B, 14U234B, 14U285B, 14U286B, 14U344B, 14U444B, 14U454B, 14U544, 14U554, 14U555, 14U557, 14U594 & 14U595
Kenmore: 484.1464180
ADD BASIC S&H
 

   
SergerBelt412721.jpg Singer Serger Belt #412721 (single teeth)
$12.95
(EZ-6 5/8")(1418L)(40164)(60020)(25-0303-01A)(93-414127-21/000)
Fits Singer Serger: 14U12, 14U13, 14U34, 14U44, 41U554, 14U234B, 14U285, 14U64A, PRO4D and others requiring this belt.
Also fits BabyLock Serger: BL4-28, BL5180
Necchi Serger: NL-3
Pfaff Serger: 4762, 4772
Kenmore Sewing Machine: 117.840, 117.841, 158.12290, 158.12292, 158.12310, 158.13413, 158.13500, 158.13580, 158.1595180
ADD BASIC S&H


   
SergerBelt412721Double.jpg Singer Serger Belt #412721 (double teeth)
$12.95
(EZ-6 5/8")(1418L)(40164)(60020)(25-0303-01A)(93-414127-21/000)
Double teeth for better fit and less heat build up
Fits Singer Serger: 14U12, 14U13, 14U34, 14U44, 41U554, 14U234B, 14U285, 14U64A, PRO4D and others requiring this belt.
Also fits BabyLock Serger: BL4-28, BL5180
Necchi Serger: NL-3
Pfaff Serger: 4762, 4772
Kenmore Sewing Machine: 117.840, 117.841, 158.12290, 158.12292, 158.12310, 158.13413, 158.13500, 158.13580, 158.1595180
ADD BASIC S&H


   
SergerBelt557725.jpg Singer Serger Belt #557725
$12.95
Fits Singer: 14CG744, 14CG754, 14SH644, 14SH654, 14SH744, 14SH754
Positive traction motor drive belt.
ADD BASIC S&H


   
SergerBelt67701.jpg Singer Serger Belt #67701
$12.95
Fits Singer Serger 14J334
Positive traction motor drive belt.
ADD BASIC S&H


   
SergerBeltA10011000.jpg Singer Serger Belt #A10011000
$12.95
Fits Singer serger: 14T948DS, 14T957DC, 14T968DC
Positive traction motor drive belt.
ADD BASIC S&H


   
4inchscissors.jpg 4 Inch Embroidery Scissors
$6.95
4" embroidery scissors
Fine sharp point ideal for close work in small areas
CAUTION: As in most cutting instruments the point and blades are sharp and should be handled ONLY by adults for cutting and craft use.
ADD BASIC S&H
 

   
opermankitp.gif Operator Maintenance Kit
$12.95
*High quality oil in refillable extendable spout. Long neck spout style of oiler #NK2 may vary depending on availability.
*Lubricant for gears
*Lint brush
*Extra fine quality screw driver for tension adjustments
*2 strips of crocus cloth for removing burs on hook, etc.
*6" abrasive cord #52 for removing burs in and around needle plate, etc.
*Oil and lubricant instructions pamphlet for various models
ADD BASIC S&H
 

   
newfeatherweightbelt.jpg Husqvarna Viking / White Serger Overlock Positive Traction Motor Belt (bin VB-11) #11758
$12.95
Fits Viking: S300, 340-D
White: 216
ADD BASIC S&H


   
newfeatherweightbelt.jpg Husqvarna Viking / Brother Serger Overlock Positive Traction Motor Belt (bin VB-15) #X76413-001
$18.95
146XL025, 73 teeth
Fits Viking: 1002LCD
Brother: 9700LD, PL1500, PL1600, PL2000, PL2100
ADD BASIC S&H


   
newfeatherweightbelt.jpg Husqvarna Viking Serger Overlock Motor Belt (bin VB-16) #4110001-12
$19.95
Fits: HuskyLock 905, 910, 936
ADD BASIC S&H


   
newfeatherweightbelt.jpg Husqvarna Viking / Brother Serger Overlock Positive Traction Motor Belt (bin VB-12) #12653301
$12.95
150XL025, 75 teeth
Fits Viking: 234, 431, 435, 440, 444, 535D
Brother: 523N, 524N, 525N, 526N, 546, 546D, 626, 634D, 834DP
ADD BASIC S&H


   
MinatureDriverSet.jpg Mini Precision Screwdriver Set (Bin T-4)
$9.95
Small compact set includes compact bit holder or store bits in handle
Set includes: Slotted: 1/8", 3/32", 5/64", 5/64", 1/16"
Phillips: PH000, PH00, PH00, PH0, PH1
Torx star: T4, T5, T6, T7, T8, T9, T10, T15
ADD BASIC S&H


   
DriverSetWithOffsetRatchet.jpg Small Tools, Driver Set with Offset Ratchet (Bin-T-1)
$17.95
Sewing machine and other small appliances require different tools than your car or home
This set is a great place to start
Set contains one each: reversible ratchet handle, spinner screwdriver handle, 3 1/4" extension handle
One each of the following bits
Slotted screwdriver: 1/8", 1/4"
Phillips screwdriver: PH#1, PH#2
Hex: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4",
Torx: T6, T8, T10, T15, T20, T25
ADD BASIC S&H


   
TorxLongNarrowBody.jpg Torx Bit Set 5" Long with Thin Shaft (Bin T-2)
$16.95
Sewing machine and other appliances require a long thin shaft for getting into confined areas
5" long with a standard 1/4" hex shaft
Set includes one each: T6, T7, T8, T9, T10, T15, T25, T30, T40
ADD BASIC S&H


   
tweezersTWE6p.gif Tweezers #TWE6
$3.95
Top quality tweezers with guide pin
6" long with bent point design.
The best tool in your accessory box. Ideal for threading needles on sewing machines and needles and loopers on sergers. Many other practical sewing uses: removing thread and lint build-up from small areas in the sewing machine, pulling out unwanted stitches, etc.
ADD BASIC S&H
 

   
Small Torx.JPG Torx Bit Set Small (Bin T-3)
$13.95
Hard to find Torx bits, standard 1/4" hex shaft
Set includes: T4, T5, T6, T7, T8, T9, T10, T15, T20, T25
ADD BASIC S&H





Email: sewingmachine221sale@pop.bizland.com
This web site is owned and operated by:
Discount Sewing Machine Service 2000
Site contains material that are trademark TM and servicemark SM.
All material is for personal use only and is not to be mass produced.
Pages constructed and maintained by Kas