 |
| Singer Parts |
| Singer Gears, Timing Belts & Motor Belts |
| Singer Levers & Dials |
| Singer Bobbin Winders |
| Singer Extension Tables & Mounting Kits |
| Singer Bobbin Cases & Bobbins |
|
NOTE: On multiple parts order pay freight for only one item. ADD BASIC S&H of $3.95 Parts order over $45.00 FREE freight. Excluding Freight Intensive (F/I) Items. |
Singer Tension Complete (new) Without Numbers #55520$34.95 Fits: VS2, 27, 28, 127, 128 Old style tension without numbers comes complete as viewed. Check spring pulls up. This tension system complete is mounted with the screw-in post thread size 10-28. In most cases this tension is screwed into the internal casting of the machine "does not require a drum". It is for machines with the internal tension release pin (when you raise the presser foot lifter the tension plates open), this pin will need to be adjusted "cut" according to your individual machine. It can also substitute for external release tension #54526 which is No Longer Available. ADD BASIC S&H [Add to Cart] [View Cart] |
Singer Tension Complete New with Drum #44118 (32654)$39.95 (069960)(061087) Front mount tension sold complete only as viewed with drum without numbers Check spring "pulls down spring up" Drum size approximately 11/16" diameter Screw-in post threads approximately 10-32 Very common fits many models: Fits older Singer: 66 class, 99-13 Singer industrial: 31-15, 31 class, 44 class, 78 class 331K Consew: 30 class, (106C) Pfaff: 138, 238, 434, 436, 438, 461, 462, 463, 467, 469, 470, 483 May fit other models not mentioned ADD BASIC S&H [Add to Cart] [View Cart] |
Singer 20U Tension Complete #541957 (541699)$39.95 Heavy duty tension sold complete as viewed Set screw post size of drum approximately 11/16", spring pulls down Fits: 20U, 20U33, 20U4143, 20U23, 191D200A, 191D300A ADD BASIC S&H |
Singer Tension Complete (new) #270087 95 Class Professional / Commercial $29.95 Heavy duty tension sold complete as viewed Tension post set screw (2mm) Size of drum approximately 11/16", spring pulls down Fits: 95 class, 96 class, 195K, 196K, 241 class, 245 class, 251 class, 281 Class, 291U class, 366K, 391U class, 400W, 491D, 491U class, 600W, 770D Make sure the machine housing is clean, apply a small coat of oil on the outside of the drum for easy insertion ADD BASIC S&H |
Singer "Original" Tension with Manual External Release #54526****$0.00 ****SOLD OUT**** VERY LIMITED SUPPLY Original refurbished tension from actual older models For many early Singer models which did not have an internal tension release by raising the presser foot lifter. This was done by pushing on a lever attached to and just below the tension. Sold complete ONLY This is a screw in tension system on the front of the machine. ADD BASIC S&H [Add to Cart] [View Cart] |
Singer "Original" Tension Side Mount Complete with Numbers #125418$59.95 Original refurbished old style side mount tension with numbers from actual older models (no longer available as new) SEE Singer Tension Complete #HA17, above for a possible replacement. Fits: 15-88, 15-90, 15-91, 15-125 ADD BASIC S&H [Add to Cart] [View Cart] |
|
Singer Tension Complete #HA17 $29.95 (SO162)(HA15)(JA-15) After market, not original. Fits most old style 15 class type machines, (Singer Look-A-Like), with tension mounted on the back side (spring pulls up). Numbered black dial for adjusting. Comes with instructions. ADD BASIC S&H [Add to Cart] [View Cart] |
Singer 15-91 Plate #125412 and Tension #125418 Complete$79.95 Plate with tension complete Fits Singer: 15-91, 15-90, 15-88 Original part removed from a machine in our inventory Sold as viewed ADD BASIC S&H |
Singer 66 Class Original Tension #32654 with Drum$59.95 Comes complete with drum as viewed Fits: 66-1, 66-4, 66-6, 66-8, 66-14, (Not for 66-16), 66-18, 66-24, 99-13 Very Limited Supply Original NO Longer Available as new as a complete unit, removed from a machine in our inventory ADD BASIC S&H |
Singer 66 Class (new) #32654-01 without Drum$34.95 This tension has screw-in post thread size approximately 10-28. The thread post will screw into your existing drum. Fits: 66-1, 66-4, 66-6, 66-8, 66-14, (Not for 66-16), 66-18, 66-24, 99-13 ADD BASIC S&H |
Singer "NEW" Tension with Numbers (2-Dics) #32757 (033715)$28.95 Singer NEW tension, after market, good quality front mount. Fits Singer: 66-16, 99-28, 99K-28, 99-31, 185, 185J, 192K, 192K3 Spartan For many older straight stitch machines (two discs) ADD BASIC S&H |
Singer "Original" Old Style Tension Complete Model 221 #45871 ****$0.00 ****SOLD OUT**** LIMITED SUPPLY Original #45871 refurbished tension from actual older models SEE Singer "NEW" Tension Complete #45871, below, for a possible replacement. ADD BASIC S&H [Add to Cart] [View Cart] |
Singer "NEW" Tension Complete #45871$28.95 After market, good quality, front mount with numbers Fits: 101, 1200 , 201, 221, 301 400/500 slant-o-matic, black only. ADD BASIC S&H [Add to Cart] [View Cart] |
Singer "Original" Tension #170139 (bin 187)$59.95 Original tension removed from a machine in our inventory. Fits Singer 301 In the shopping cart instructions please state color needed, black or brown. ADD BASIC S&H |
Singer "Original" Tension #105192 (bin 188)$59.95 (188911) Singer original tension removed from a machine in our inventory. Fits Singer: 206K, 206K25, 206W, 306K, 306K25, 306W, 319K, 319W The above models are early Singer zig-zag machines. The tension system will have three tension discs, where most straight stitch models requiring #32757 tension system will have only two tension discs. ADD BASIC S&H |
Singer "NEW" Tension (3-Dics) #105192 (bin 188)$29.95 Singer NEW tension, after market, good quality front mount. Fits Singer: 206K, 206K25, 206W, 306K, 306K25, 306W, 319K, 319W The above models are early Singer zig-zag machines. The tension system will have three tension discs, where most straight stitch models requiring #32757 tension system will have only two tension discs. ADD BASIC S&H |
Singer "Original" Tension #179660 (172227) (bin 189)$59.95 Singer original tension removed from a machine in our inventory. Fits Singer: 327, 327K, 328, 328K In the shopping cart instructions please state color needed, black, brown or tan. ADD BASIC S&H |
Singer "Original" Tension #172325 (bin 190)****$0.00 ****SOLD OUT**** Original tension removed from a machine in our inventory. Fits Singer 401A, 403A, 404 SEE Singer "NEW" Tension Complete #45871, above, for a possible replacement. ADD BASIC S&H |
Singer "Original" Tension #172546 (bin 191)$59.95 Original tension removed from a machine in our inventory. Fits Singer: 500, 500A, 501, 501A, 503, 503A ADD BASIC S&H |
Singer Tension #153564-451$39.95 Fits Singer: 514, 518, 534, 538, 560, 802, 807, 809, 813, 814, 818, 822, 824, 827, 833, 834, 838, 844, 6513, 6522, 6528, 6533, 6543, 6544, 6548 Brother Bicor VX1005 Finesse 800 series ADD BASIC S&H |
Singer Standard Out-side Tension Complete (28) #422403-455 $24.95 (172325)(422403-457)(422403-452)(422403-459)(531883-451)(507448)(421740-451)(446323-477)(37988-406)(037988-406) Singer standard out-side tension sold complete (cream color). This is a spring pull-up replacement for many older models where the tension and/or tension parts are no longer available. Comes with directions. Fits many Singer models, some older and some newer models which may include: 237, 239, 240, 241, 242, 247, 247AP, 248, 250, 251, 252, 257, 258, 259, 288, 300, 347, 360, 400, 403, 457, 466, 476, 477, 478, 500, 502, 507, 509, 513, 522, 527, 533, 543, 600, 603, 604, 620, 620E, 625, 626, 628, 629, 630, 630E, 635, 636, 638, 639, 640E, 645, 646, 649, 1247, 1263, 1280, 1288, 1802, 1803, 1812, 1852, 1862, 1872, 1873, 2404, 2430, 3101, 3102, 3103, 3105, 3140, 4522, 4525, 4526, 4528, 4530, 4825, 4828, 4830, 6021, 6102, 6104, 6105, 6106, 6110, 6120, 6130, 6136, 6146, 6152, 6156, 6174, 6184, 6201, 6202, 6211, 6212, 6214, 6215, 6217, 6221, 6606, 8734, 8834, 9900 On some models you may need to ream-out the sewing machine mounting hole. Where this tension system complete is a replacement for models listed above the individual parts listed below may not fit as individual replacement parts on your older tension system. ADD BASIC S&H [Add to Cart] [View Cart] |
Tension Complete #DP60683 $26.95 (MO2052)(MO30)(3087)(39543)(46105)(55480-B)(647506004)(200398)(202017)(201401)(4830)(34408)(34532) Fits Singer 5102, 5107, 5122, 5123, 5124, 5127 Kenmore 158 series where the spring pulls up JC Penny 6984 and White 1415 Outside diameter of mounting barrel measures approx. 23/32". Special Note: Depending on your model you may need to remove paint residue on the surface of the fixing hole for a better fit. You also may need to cut the tension release pin to fit the tension release lever on your machine. ADD BASIC S&H [Add to Cart] [View Cart] |
Check Spring #66774-002 (Bin 203)(#16)$3.95 (353248) Check spring #16 fits tension #422403-455 ADD BASIC S&H |
Tension Discs (Set of Two) #2102-806 (Bin216)(#17)$3.95 A set of two tension discs #17 fits tension #422403-455 ADD BASIC S&H |
Tension Stud Post with Gear Complete #44454 (Bin 199)(#18)$4.95 (153318) Tension stud post with gear (#422403-600) complete #18 to fit tension 422403-455 ADD BASIC S&H |
Tensino Stud Gear #422403-600 (Bin200)(#18A) $3.95 (81480-900) Tension stud gear #18A to fit tension 422403-455 Tension gear slides onto tension stud #44454 ADD BASIC S&H |
Thread Take-up Spring/Thread Guard #45343-891 (Bin217)(#19)$4.95 Thread take-up spring/thread guard #18 to fit tension 422403-455 ADD BASIC S&H |
Tension Spring Indicator Cup #422403-500 (Bin201)(#20) $3.95 (37987-406)(44879-472) Tension spring indicator cup #20 to fit tension 422403-455 This cup also works with the tension release mechanism. ADD BASIC S&H |
Tension Spring #125314 (Bin211)(#21)$4.95 Tension spring #21 to fit tension 422403-455 ADD BASIC S&H |
Tension Stop Washer #37984-819 (Bin214)(#22)(45865)$3.95 Tension stop washer #22 to fit tension 422403-455 #45865 (for many old style Singer models) is no longer available, this new style washer is a replacement however you will need to modify it by shorting the prong ADD BASIC S&H |
Tension Indicator Adaptor Nut #507405-819 (Bin215)(#23)$3.95 Tension indicator adaptor nut #23 to fit tension 422403-455 ADD BASIC S&H |
Tension Indicator Complete #37979-406 (Bin202)(#26 with #24 & #25)$4.95 (153277-453) Tension indicator complete #26 with #24 & #25 to fit tension 422403-455 NOTE: This part #26 is a new design, which will fit older and newer models. The ring part #24 is no longer available as a separate piece it is a one part molded plastic piece. ADD BASIC S&H |
Tension Release Pin #37986-806 (Bin213)(#27)$3.95 Tension release pin complete #27 to fit tension 422403-455 Approximately 1 1/4" in length ADD BASIC S&H |
Tension Thread Guide #155727 (Bin249)$3.95 (37790) Fits: 237, 239, 600, 603, 604, 620, 620E, 625, 626, 628, 629, 630, 630E, 635, 636, 638, 639, 640E, 645, 646, 649 ADD BASIC S&H |
Singer 6268 Thread Take-Up Cover #314480-930 (Bin341)****NLA****$0.00 ****No Longer Available**** (313397-451) Singer thread take-up cover with graphics Limited Supply Fits: Singer models 6267, 6268, 9900 ADD BASIC S&H |
Singer 6233 Series Thread Take-Up Cover #312775-451 (Bin342)****NLA****$0.00 ****No Longer Available**** Singer 6233 series thread take-up cover with graphics Limited Supply Fits: Singer models 6233, 6234, 6235 ADD BASIC S&H |
Singer Thread Take-Up Cover #314718-451 (Bin343)$29.95 (314718-451)(17)(314718-455)(314718-457)(314718-458) Singer thread take-up cover with graphics Limited Supply Fits: Singer models 4610, 4613, 4617, 4622, 4623, 4552, 5910, 7000, 7005, 7028, 70037, 7043, 7050, 7060, 9005, 9005N327, 9008, 9010, 9015, 9018, 9020, 9022, 9022E, 9032, 9110, 9113, 9117, 9124, 9130, 9133, 9137, 9143, 9410, 9416, 9420, 9423, 9430, 9432, 9408, 9408N304, 30920 The graphics or color may vary slightly from your model. This item may fit other models not listed ADD BASIC S&H |
Tweezers #TWE6$3.95 Top quality tweezers with guide pin 6" long with bent point design. The best tool in your accessory box. Ideal for threading needles on sewing machines and needles and loopers on sergers. Many other practical sewing uses: removing thread and lint build-up from small areas in the sewing machine, pulling out unwanted stitches, etc. ADD BASIC S&H [Add to Cart] [View Cart] |
Operator Maintenance Kit$12.95 *High quality oil in refillable extendable spout. Long neck spout style of oiler #NK2 may vary depending on availability. *Lubricant for gears *Lint brush *Extra fine quality screw driver for tension adjustments *2 strips of crocus cloth for removing burs on hook, etc. *6" abrasive cord #52 for removing burs in and around needle plate, etc. *Oil and lubricant instructions pamphlet for various models ADD BASIC S&H [Add to Cart] [View Cart] |
Free Motion Guide Grip $39.95 Fits ALL machines. No need to place your fabric in a hoop for free-motion sewing. Place on top of fabric for free-motion, quilting, embroidery or monogramming. The friction surface on the underside of the guide grip holds the fabric taut and provides handles for moving the fabric. Set your machine for normal free-motion sewing according to your operators manual. Note: For free-arm models works best with your sewing machine extension plate attached. Some fabrics especially light weight fabrics may require a stabilizer. Some projects may require the conventional two piece wood hoop. NOTE: For additional information click on this link "How to do Free Motion Sewing" This item is Freight Intensive (F/I), $8.95 is the basic S&H for ALL Freight Intensive (F/I) items [Add to Cart] [View Cart] |
Mini Precision Screwdriver Set (Bin T-4)$12.95 Small compact set includes convenient bit holder Set includes 18 different bit ends: Slotted: 1/8", 3/32", 5/64", 5/64", 1/16" Phillips: PH000, PH00, PH00, PH0, PH1 Torx star: T4, T5, T6, T7, T8, T9, T10, T15 Depending on current inventory this item may very in color and / or brand ADD BASIC S&H |
Small Tools, Driver Set with Offset Ratchet (Bin-T-1)$24.95 Sewing machine and other small appliances require different tools than your car or home This set is a great place to start Set contains one each: reversible ratchet handle, spinner screwdriver handle, 3 1/4" extension handle One each of the following bits Slotted screwdriver: 1/8", 1/4" Phillips screwdriver: PH#1, PH#2 Hex: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", Torx: T6, T8, T10, T15, T20, T25 ADD BASIC S&H |
Torx Bit Set 5" Long with Thin Shaft (Bin T-2)****No Longer Available****$0.00 ****No Longer Available**** Sewing machine and other appliances require a long thin shaft for getting into confined areas 5" long with a standard 1/4" hex shaft Set includes one each: T6, T7, T8, T9, T10, T15, T25, T30, T40 ADD BASIC S&H |
Torx Bit Set Small (Bin T-3)$13.95 Hard to find Torx bits, standard 1/4" hex shaft Set includes: T4, T5, T6, T7, T8, T9, T10, T15, T20, T25 ADD BASIC S&H |
Email: sewingmachine221sale@pop.bizland.com
This web site is owned and operated by:
Discount Sewing Machine Service ©2000
Site contains material that are trademark TM and servicemark SM.
All material is for personal use only and is not to be mass produced.
Pages constructed and maintained by Kas