Home
 
Brother Parts
 
Singer Pressure Feet
 
Kenmore Feet
 
page63.html
 
Anatomy of a Needle
 
How to do Free Motion Sewing
 
Presser Feet ALL Brands
google5993c5666b5daeec.html
Type "B" Pressure Feet

This NEW style snap-on shank will allow your machine to accept a wide variety of pressure feet. It can also be used as a replacement for conventional one-piece feet measuring approximately 3/4" high.



NOTE: On multiple parts order pay freight for only one item.
ADD BASIC S&H of $3.95
Parts order over $45.00 FREE freight. Excluding Freight Intensive (F/I) Items.

   
4inchscissors.jpg 4 Inch Embroidery Scissors
$12.95
4" embroidery scissors
Fine sharp point ideal for close work in small areas
CAUTION: As in most cutting instruments the point and blades are sharp and should be handled ONLY by adults for cutting and craft use.
packaging and brand may vary
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LVFootKit1146.jpg Low Vertical Snap-on Presser Foot Kit #1
$23.95
Does not come with white box as viewed
Fits ALL low vertical sewing machines, this kit can even replace your older style low vertical screw-on system.
Kit contains 11 pieces including handy storage case: main snap-on low vertical shank (5011-1), zig-zag foot, straight stitch foot (center needle position machines ONLY, if you have a left needle position machine please let us know) *hemmer foot, *overcasting foot, *blind-hem foot, *button foot, zipper foot, quilting guide, seam ripper, storage case.
*Enhanced instructions will be provided.
Fits: Alder, Alphasew, Atlas, Babylock, Brother, Domestic, Dressmaker, Dial Sew, Elna, Elnita, Euro-Pro, Jaguar, Janome, J.C Pennys, Kenmore (not super high), Montgomery Ward, Morse, Necchi, Nelco, Precision, Riccar, Simplicity, Singer (not slant needle), Universal, White, Yamata and all other low vertical shank sewing machines.
ADD BASIC S&H


   
Walking.FreeMotion.QuiltingFootKit1141.jpg Low Vertical Quilters Kit #2
$29.95
Fits ALL low vertical sewing machines
Kit includes: Walking Foot (WF5011), Free Motion Foot and 1/4" Snap-on Piecing Foot (this foot needs to be used with shank 5011-1 below), this shank is included in kit #1 above.
*Enhanced instructions will be provided for all three feet.
ADD BASIC S&H


   
BsnaponlowshankBinB1-2.jpg Type "B" Snap-on Low Vertical Shank (bin B-1)
$4.95
(5011-1)(S-006910008)(S-357986900)(S-076250)(416128201)(KM-37170)(KM611520003)
(B-X50848001)(B-138135052)(B-138134-051)(403194)(316008)
This standard low vertical snap-on shank will allow your machine to accept a wide variety of pressure feet. It can also be used as a replacement for conventional one-piece feet measuring approximately 3/4" high.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Bns shankXC3015051.gif Type "Bns" Snap-on Low Vertical Shank #XE2555001 (bin B-28-1)
$12.95
(085016)(129855-001)(138134021)(XC3015031)(XC3015051)(XE2555101)
New style "B" shank
Fits Brother: CE-4000, CE-5000PRW, CE-5500, CE-5500PRW, CP-6500, CP-7500, CS-770, CS-6000, CS-8060, CS-8072, CS-8100, CS-8150, CS-8200, DS-120, DS-140, ES-2000, EX-660, FS-20, FS-40, FS-40WT, HE-240, HS-2500, Innov-ís 40 (NS40), LB-6800PRW, LS-30, LS-2125, LS-2125i, LS-2130, LS-2150, LX-3125, LX-3125e, PC-210, PC-210PRW, PC-4000, PC-5000, PC-6000, PC-8000, PE-300S, PE-400D, PS-1700, PS-1750, NV2500D, NV-4000D, NX-200, NX-400, NX-600, SE-270D, SE-350, SE-400, SQ-9000, XL3750, XL-5500, XL-6040, XL-6050, XL-6060, XL-6452, XL-6562, XR-46, XR-52T, XR-65T, XR-4040 & XR-7700, XR9000 and many others
Babylock: BL40, BL40A (Grace), BL137A2 (Sofia 2), BL200A (Elizabeth), BL2100, BL2150, BLCC (Crafter's Choice), BLCC2 (Crafter's Choice), BLDC, BLDC2 (Decorator's Choice), BLMY (Melody), BLQC, BLSO (Ellisimo), BLG (Ellegante), BLG2 (Ellegante 2), BLSR (Espire), BLTP (Tempo), ESN (Encore), ESP (Espire) & INT (Intrigue)
Singer: 1500 Izek, 2009 Athena, 7422, 7424, 7426, 7430, 7436, 7442, 7444, 7446, 7462, 7463, 7464, 7466, 7468, 7436, 7470, 8763 Curvy, 8780 (Curvy), CE-100, CE-150, CE-200, CE-250, CE-350, SES1000 & SES2000
FITS ALL LOW VERTICAL machines
Uses ALL "B" feet
Use in conjunction with zig-zag foot XC3021051 for locking feature over heavy seams. There is a cut out for the black button on the foot.
SPECIAL NOTE: Your present shank may not have this locking cut-out feature however, this shank is compatible with low vertical shank machines allowing you to use all of your existing "B" type feet.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Bns7mmzzXC3021051.gif Type "Bns" 7mm Zig-zag Lock-in Foot (bin B-29)
$7.95
(XC3021051)
Fits "Bns" shank (bin B-28) above
When you encounter a seam that is too thick, press the black button on the left side of the foot securing to the shank preventing the foot from pivoting.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
presserfootholderHP32968.jpg Singer "B" "New Style" Presser Foot Holder (bin B-37) HP32968 (lock)
$8.95
HP32968 (085016)
Singer presser foot holder/shank lock-in type.
Fits: 9910, 9920, 9940
Substitute for #085016 (7400 series, CE100, CE200, Inspiration 4200 series and many other low vertical models.
Features a locking device when used with zig-zag foot #HP32969 for sewing over heavy seams. This holder can also be used on all low vertical machines and will accept the type "B" snap-on presser feet.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Spresserfoote.jpg Singer Zig-zag Snap-on Foot (lock) #HP32969 (bin B-37a)
$8.95
Songer zig-zag snap-on foot faeturing a lock in button when used with presser foot holder #HP32968.
This is the general purpose foot used for many applications. When sewing heavy fabrics or seams.
Push the button located at the right of the foot and lower the foot. This will lock the foot in a fixed possition to help prevent the front of the foot from lifting up, thus pushing the seam away.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
seamguide55415.jpg Adjustable Seam Guide #55415
$3.95
For extra help in keeping seams straight, particularly beneficial for quilters and other sewing functions requiring accurate stitch placement. For sewing machines having a screw hole in the bed of the machine on the right side of the needle plate.
Leading edge of guide is 5/8" wide and the adjusting is 1 5/8" long.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
PresserFootScrew286-2.jpg Pressure Foot Screw #286-S (Bin-04)(1-32)(416 03 02-01)
$3.95
(354135-452)(504030)(KM135)(647112009)(004106211)(Viking 411 19 97-01)
Standard for most models including Singer, Viking 6000 series and older, Brother, White, Kenmore and many other models including type "A", "B", vertical low & high.
Will fit older Viking (A)(B) HuskyStar series, (01) 2000, 3000, 6000 series.
This screw is also used to hold on the side cover plate and the back plate on some older Singer models
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BrotherSmallPresserFtScrewXA4813051.jpg Brother Small Presser Foot Screw #XA4813051
$4.95
Brother small presser foot screw.
ADD BASIC S&H


   
TypeAScrew Needle Clamp Attachment Screw (long) for Brother #SKH-BC
$16.95
Needle clamp presser foot extension attachment screw to be used as a replacement screw for models with a short needle clamp screw. This will allow your machine to use presser feet which are activated by the up - down movement of the presser bar such as: walking foot, ruffle/pleating foot, free motion darning foot and some old style buttonhole attachments.
Fits Brother: LS1217, LS1520, LS1717, LS2125, LS2220, LS2720, LS2725, LS2820, LS2825, LS2920, VX1120, VX1125, VX1140, VX1250, VX1435, VX2240.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SSCenterB2.jpg Type "B" Straight Stitch / Quilting Foot (center) (bin B-2) #0069916008
$6.95
Center needle position machines ONLY.
For straight sewing ONLY.
Designed to help eliminate puckering and skipping on light weight fabrics. Great for quilters with the right side of the foot shorter than the left side spaced at 1/4" from edge of foot to needle.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SSLeftB3.jpg Type "B" Straight Stitch Foot (left) (bin B-3)
$3.95
Left needle machines ONLY.
For straight stitch ONLY.
Gives lighter fabrics better stability and control.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
AdjustableNarrowStraightStitchFoot.jpg Adjustable Narrow Straight Stitch Foot #VG0551 (Bin-72A)
$14.95
Screw-on standard low vertical shank (A), (B)
Use this adjustable straight stitch foot when you need precise stitch placement
Also has a cut out on the right and left sides for sewing close to the edge of cording and many other uses
ADD BASIC S&H


   
ZZSnapOnB4.jpg Type "B" 5mm Zig-zag foot #5011-3 (bin B-4)
$2.95
(Singer006806008)(KM67514)(KM37173)(KM40391)(136135-051)(138135-051)(138135-152)
5mm zig-zag foot.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
A7mmZZFoot820506007.jpg Type "A" "B" 6/7mm Wide Zig-zag Foot (bin B-5)
$3.95
(Singer006918008)(NH/KM685502019)(820506007)(357988-900)
Wide zig-zag foot fits new style snap-on lever shank (357986-900)(006910008)(5011-1)
For new style 3510, 3709, 3722, Quantum 3810, 3820, 3825, 3860, 6038, 6550, 7312, 7322, 7350, Stylist 8090, Quilter 7380, 7360, 950DE, New Home, Kenmore, White #2037 and many others.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Bns6mmZigZagFootBinB6.jpg Type "Bns" 6mm Zig-zag Foot (bin B-6)
$6.95
(X51953001)(X51953051)(137748-001)
Fits new style "B" type shank for Brother model XR46, XL6562, XL6452 and others.
Standard zig-zag foot extra-wide 6mm.
Use this foot for straight stitch and zig-zag stitching. Thread enters on the left side of front foot (prevents fabric from rolling in front opening)> Transparent front for better vision. Will also fit on "B" shank #5011-1 and #5011-2.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BSnapOnSinger7mmZigZagFtB34.jpg Type "B" Snap-On Singer 7mm Zig-zag Foot (bin B-34)
$8.95
(600028)(076251)
Singer general sewing presser foot.
Fits ALL "B" snap-on systems including the Inspiration 4220, 4228 models
Features: Right side thread entry, guide marks for left, center, right needle position, extra wide sole and zig-zag opening, 1/4" opening in front portion of the foot to guide small trim, elastic or heavy decorative threads.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
TeflonZZB7.jpg Type "A" "B" 5mm Zig-zag Teflon Foot (bin B-7)
$8.95
(XC1949002)(5011-3T)
This teflon foot glides over leather, vinyl and suede with more ease.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LowVerticalFoot1723.jpg Vertical Low Screw-on Zig-Zag Foot #1723
$4.95
(9363)(200618)(8522)(40390)(735503007)(67514)(8522)(735503018)(45563)(65770)(650504002)
This screw-on system has been used for many years. It is a standard vertical low system.
Foot attaches with thumb screw.
Height of foot approx. 3/4".
For modern conversion snap-on shank #5011-1 allowing for a wider selection of pressure feet click on "B" feet.
Type "B" Pressure Feet
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BZZSatinStitchFootbinB8.jpg Type "B" Zig-zag Satin Stitch Foot (bin B-8)
$4.95
(5011-14)(5011-5B)(006172008)
When using a satin stitch this foot is grooved out on the underside for better feed and fabric control.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BMonogramSatinFootbinB31.jpg Type "B" Monogramming / Satin Stitch Foot (bin B-31)
$7.95
(X53840-301)(N)(J)(S-085015)
Extra wide foot with clear front and cut-out underside to allow decorative patterns, monogramming, satin stitch, buttonholes and applique stitches to flow smoothly under the foot.
Fits Singer B8200, CE100, CE200, 7422, 7424, 7426, 7436CL, 7442, 7462, 7464, 7468 and others.
Fits Brother: B8200, CE-4000, CE50000PRW, CE-5500PRW, CP-6500, CP-7500, CS-100t, CS-4000, CS6000, CS-6000t, CS-6000i, CS8060, CS8100, CS8150, CS8200, EX-660, HE-240, HS-1000, HS-2000, NV4000D, NX200, NX400, NX600, PC7000, PC7500, PC8000, PC8200, PC8500, PC8895, SE-270D, SE-350, SQ-9000, ULT2001, ULT2002, ULT2003D, XR-4040, XR-6600, XR-7700, XR-9000
Fits Babylock: Group A, Group B, Group D, Group G, Group H
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BOpenToeAppliqueFootBinB9.jpg Type "B" Open Toe Applique Foot (bin B-9)
$6.95
#P60794
Transparent, grooved out on the under side with open front for greater visilibity.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
VscrewOnOpenToeAppliqueFtP60791.jpg "V" "B" Screw-on Open Toe Applique Foot #P60791 (bin B-43)
$14.95
Vertical screw-on open toe applique foot.
Transparent, grooved out on the under side with open front for greater visilibity.
ADD BASIC S&H


   
SnapOnWideZip.jpg Type "B" Wide Zipper Foot (bin B-10)
$2.95
(5011-10)(357992)(006905008)(X59370-051)
Sews left and right side.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SnapOnNarrowZip.jpg Type "B" Snap-On Narrow Zipper Foot #5011-3N (bin B-10N)
$3.95
Narrow Zipper / Cording Foot for getting close to the work.
Your machine MUST have a left and right needle position to use this foot.
ADD BASIC S&H


   
ABzip2.jpg Type "A" "B" Invisible Zipper Foot (bin B-11)
$7.95
(5011-11)(SA128)(5011-21PD)
For installing invisible zippers.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
AdjustableZipperFootScrewOn55510.jpg "V" "B" Screw-on Adjustable Low Vertical Zipper Foot (bin B-12a)
$14.95
(55510)(1805)(6792)(593401008)(161127)
ALL METAL
This foot has the shank attached and moves from side to side.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
AdjNarrow ZipCordingTeflonFoot.jpg "V" "B" Screw-on Adustable Narrow Teflon Zipper Foot #V/G-7961 (bin B-12b)
$14.95
(5510T)
Fits low vertical shank machines.
This teflon designed foot sews better on hard to feed fabrics, such as nylon, plastic and leather.
This foot is designed to facilitate the placement of stitching close to a raised edge: zipper insertion, corded seams, tubular cording, slipcover welting and similar applications.
The screw on the back allows you to adjust the foot very close to the work area either on the left or the right of the needle.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LFLowVerBinB16.jpg Little Foot Low Vertical (bin B-16)
$24.95
(LF-101)
Little Foot low vertical screw-on
Produced in clear Lexan with red line markings for greater visiblity for ALL you machine piecing.
The right edge 1/4" from center needle position which gives you an exact 1/4" seam allowance.
The left edge is a scant 3/8" from center needle position. This gives a better tension control as it will cover more feed dogs on most machines. Perfect for machine piecing.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LittleFoot106-2 Type "A" "B" Snap-on "Little Foot" #LF-106
$24.95
Quilters "Little Foot" for 7mm machines NOT for 9mm machines
Great for quilters. Right edge 1/4" from center needle position for accurate 1/4" seam allowance: left edge 1/8" from center needle position. Perfect for machine piecing.
For additional Type "A" feet click on this link Type "A" Pressure Feet
Compatible with shanks #5011-1, #5011-2 and #804509000.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BQuaterEdgeFt.jpg Type "B" 1/4" Snap-on Quilting / Patchwork Foot (bin B-15)
$14.95
(P60603)(SA125)(X80980-002)(21019-W)(006916008)(XC1944-002)
Center needle position machines ONLY.
Patchwork foot for quilting pieces together, 1/4" guide with 1/8" seam allowance, 1/4" scale front to back.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ScrewOnPatchworkFootP60600G.jpg "V" Screw-on Quilters 1/4" Patchwork Foot #P60600G (035932)
$14.95
Metal, 1/4" with 1/8" seam allowance. 1/4" scale front to back.
Low vertical with quliting guide, can be moved to right or left side.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BPatchQuiltingFootBinB38.jpg Type "B" Patchwork Quilting Foot (bin B-38)
$12.95
(HP31461)
Patchwork quilting foot, transparent straigth stitch center needle position ONLY.
Large leading toe on right side 1/4" from needle to outside edges left & right. Red lines on both sides 1/4" apart. Red lines on front of both toes.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ScrewOnOpenFrontQuaterInchFt.jpg "V" "B" Screw On Open Front 1/4" Foot #P60801 (bin B-42)
$14.95
Screw-on open front 1/4" foot
ADD BASIC S&H


   
BQuaterInchWithGuide.jpg Type "B" Wide Snap-on 1/4" Foot with Right Edge Guide #P60618 (bin B-41)
$17.95
Snap-on wide 1/4" edge stitching foot with black right built in edge guide.
Black guide is 1/4" from the needle stitch line.
ADD BASIC S&H


   
BVstitchGuideFtB44.jpg Type "B" Snap-On Stitch Guide Foot "P" (bin B-44)
$12.95
(SA160)(X51804001)(XA1969001)(XA8839-002)
Snap-on stitch guide foot offers up to a one inch seam guide.
ADD BASIC S&H


   
ad5011-17.gif Type "B" Quilting Fabric Guide #5011-17 (bin B-21)
$2.95
(360137)
Slides into top portion of foot 5011-1. Can be used in either direction. For guiding uniform quilt lines.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Quilting Guide #5011-10
$6.95
(SA132)(XC2215-002)(KM802422022)
Fits "A", "B", "Bns" shank and all walking feet
Use the guide to sew edge stitching, 1/4" to 2 1/2" or parallel stitches that are equally spaced with the regular pressure foot or when using the walking foot. A very useful guide when the conventional seam guide or marks on the needle plate are not functional.
Guide can be positioned from the right or the left side.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LVFMstipopenplastic2.jpg Type "B" Free Motion/Darning Foot Low Vertical (bin B-13)
$15.95
(1814)(P60432)(SA129)(XC1948-002)(X81021-002)
LOW VERTICAL (3/4" height of your existing presser foot) Remove your existing presser foot and shank to attach a walking foot. Instructions for attaching this foot will be provided.
Fits low vertical machine including the following: Alphasew, BabyLock, Bernette, Brother, EuroPro, Janome
Kenmore (excluding Super High see RWA-8),
Necchi, Riccar, Simplicity
Singer (excluding Slant see #421333-451),
Viking HuskyStar, White
For all low vertical zig-zag machines including extra wide 7mm zig-zag.
Transparent closed front foot with metal rod for darning, quilting, stippling, embroidery, monogramming, etc.
Allows the operator to move the work freely while stabilizing the fabric. Works by mounting in place of the regular pressure foot, with a fork positioned over the needle clamp screw for a spring movement.
Including many Brothers such as VX series, XL series, XR series, CS8060, CS8072, CS8150, PC2800 and PC6000.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LowFreeMotionFt006016008.jpg Low Vertical Free Motion / Darning Foot #006016008
$19.95
All metal with 5mm to 6mm opening for increased fabric stability on light to medium fabrics.
For free motion, darning, quilting, embroidery, stippling monogramming, etc.
Fits: Low vertical models including Singer 1100, 2623, 2638, 3709, 3722, 3800, 3820, 3825, 5500 class, 6038, 6500 class, 6510, 7300, 7312, 7322, 7350, 9910, 9920, 9940 and many other low vertical models.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
VABFreeMotionGuideFtP60410.jpg "V" "A" "B" Free Motion Guide Foot #P60410
$19.95
Fits ALL low vertical shank machines: Singer "V" low vertical, ALL "A" type, ALL "B" type
This large transparent plastic/foot is marked with 1/4" 1/8" guidelines for excellent visbility and accyracy when free motion quilting, stippling, monograming and embroidering.
For best results lower feed dogs or set stitch length on zero ("O")
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SingerFreeMotionFtB32.jpg Singer Embroidery "Free Motion" Presser Foot (bin B-32)
$12.95
(086330)(86625)(16)
Embroidery presser foot, free motion, darning foot
Fits: CE100, CE200, 7422, 7424, 7426, 7436CL, 7442, 7462, 7464, 7468, and others requiring this type foot.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LVopentoeFM2.jpg Open Toe Low Vertical Free Motion/Darning Foot (bin B-14)
$19.95
(P60432)(654805008)
LOW VERTICAL (3/4" height of your existing presser foot) Remove your existing presser foot and shank to attach a walking foot. Instructions for attaching this foot will be provided.
Fits low vertical machine including the following: Alphasew, BabyLock, Bernette, Brother, EuroPro, Janome,
Kenmore (excluding Super High see RWA-8),
Necchi, Riccar, Simplicity,
Singer (excluding Slant see #421333-451),
Viking HuskyStar, White

New style open toe, larger contact area, all metal.
For all low vertical feet machines including extra wide 7mm zig-zag.
Free motion, darning, embroidery, monogramming, stippling and quilters foot.
Including many Brothers such as VX series, XL series, XR series, CS8072, PC2800 and PC6000.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Brother Darning/Embroidery Foot "Q" #XA2159101
$19.95
Special push-button fit for PE8500, PE8200
Free motion, darning, embroidery, monogramming, stippling and quliters foot.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ReplacementDarningFootXA5500001pix250 Brother Darning/Embroidery Foot "Q" XA5500001 (XC1274-001) Replacement
$19.95
The original darning/embroidery foot is "NO LONGER AVAILABLE". We will be shipping the "REPLACEMENT"
Fits ULT 2001, ULT 2003D. PC-8500D
and Super Galaxie 3000
Free motion, darning, embroidery, monogramming, stippling and quliters foot.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BrotherDarningEmbroideryFootXA5357001.jpg Brother Darning/Embroidery Foot #XA5357001****NLA****
$0.00
****No Longer Available****
Fits: PE300S, PE400D, NZ500D, SE270D, SE350, SE400, LB6770, LB6800, HE120, HE240
Free motion, darning, embroidery, monogramming, stippling and quilters foot.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
fwdarpltP60402.gif Darning Plate #P60402
$8.95
Plate with screw...Very nice quality metal plate.
Fits all straight stitch and zig-zag machines (5mm or less)
Covers feed dogs for free motion sewing, sewing on buttons and required for some attachments.
Ideal for machines where a dedicated feed cover is not available or there is no feed lowering system.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BrotherDisneyEmbroideryUnit.jpg Brother "Disney" Embroidery Unit for SE270D (gently used)****SOLD OUT****
$0.00
****SOLD OUT****
This embroidery unit has been remover from a machine in our inventory. We have tested the unit for quality performance, see actual sample in picture.
Unit will be shipped as viewed: Embroidery unit, approximately 5" x 6 1/4" hoop, screwdriver and sample.
This unit fits Brother: SE270D, NV500D, NV500, NC21-SE, HE120/HE, 120PKG
All S&H will be the responsibility of the consumer.
This item is Freight Intensive (F/I), the S&H is $15.00 within the continental US


   
guidegrip4125388-45p.gif Free Motion Guide Grip
$39.95
Fits ALL machines.
No need to place your fabric in a hoop for free-motion sewing. Place on top of fabric for free-motion, quilting, embroidery or monogramming. The friction surface on the underside of the guide grip holds the fabric taut and provides handles for moving the fabric. Set your machine for normal free-motion sewing according to your operators manual.
Note: For free-arm models works best with your sewing machine extension plate attached.
Some fabrics especially light weight fabrics may require a stabilizer. Some projects may require the conventional two piece wood hoop.
NOTE: For additional information click on this link "How to do Free Motion Sewing"
This item is Freight Intensive (F/I), $8.95 is the basic S&H for ALL Freight Intensive (F/I) items
[Add to Cart]  [View Cart]

   
monogrgmmingkit1-2 Free Motion Kit (Bin-21)
$19.95
Free Motion kit includes :
6" top quality sewing machine hoop with heavy duty screw mechanism.
Collins #C28 vanishing marker for tracing or marking on fabric.
Sulky #751-03 tear away stabilizer (20" X 3 yards).
Sulky #405-01 super water soluble stabilizer (19 1/2" X 36").
Monogramming alphabet set (traceable & reusable).
Stippling practice patterns (9 patterns traceable & reusable).
Additional instructions included
Click on this link to learn more about “Free Motion Sewing”
This item does NOT qualify for FREE S&H it is freight intensive F/I.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LVWFwithguide2.jpg LOW VERTICAL Even Feed / Walking Foot (Bin LVWF)
$29.95
LOW VERTICAL (3/4" height of your existing presser foot)
Remove your existing presser foot and shank to attach a walking foot. Instructions for attaching this foot will be provided.
Fits low vertical machine including the following: Alphasew, BabyLock, Bernette, Brother, EuroPro, Janome,
Kenmore (excluding Super High see RWA-8),
Necchi, Riccar, Simplicity,
Singer (excluding Slant see #421333-451),
Viking HuskyStar, White
The walking foot (even feed/dual feed) is designed to feed the top and bottom layers of the fabric at the same time. The feed teeth on the foot work in conjunction with the feed teeth on the sewing machine moving the layers in unison. Use this foot for difficult to feed fabrics: bulky, plaids, slippery, batting or quilted fabrics. In most sewing applications set your machine for straight stitch center needle position.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SingerLowWalkFt77087.jpg Singer Low Vertical Even Feed/Walking Foot #77087
$29.95
(006185008PD)
Walking foot for sewing hard to feed fabrics, also excellant for plaids, stripes, top stitching and quilting.
This foot will not accept a quilters guide.
Fits Singer: 1100 series, 2623, 2638, 3709, 3722, 3800, 3810, 3820, 3825, 6038, 6500, 6510, 6550, 7300, 7312, 7322, 7350, 7360, 7380, 7422, 7460, 7466, 7468, 950DE, 995D2, 9910, 9920, 9940, 996D2 CE100, CE200.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
WalkingFootWF5011.jpg Low Vertical Walking Foot #WF5011
$19.95
Fits ALL low vertical sewing machines.
The walking foot feeds the top and bottom of the fabric at the same time. Note: This walking foot does not accept the quilt guide.
ADD BASIC S&H


   
BrotherWalkingFootX80927001.jpg Brother Walking Foot #X80927001
$39.95
(SA140)(XC2241-002)(130944001)(X81065-001/002)(P60455)
Fits ALL low vertical machines including Brother low vertical:VX series, XL series, XR series, LS series, PE100, PE200, PE400D, PC5000/6000/7000/8000/9000 series, PS1000, PS2150, CS8060, CS8072, CS8150, PC2800.
For model PE8200 MUST use adapter #XA6023001.
For model PE8500 MUST use adapter #XA6027001.
For model PQ1300/1500 and older style high shank machines use adapter FASTUBE-A.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly,
For quilting guide order/see item Quilting Guide #5011-10 (SA132)(XC2215-002)(KM802422022). Fits into slot on the back of the walking foot.
This foot is very useful for sewing materials such as vinyl cloth, synthetic, thin leather, etc. These materials are difficult to feed when sewing. The walking foot prevents such materials from crumpling, slipping or sticking between presser foot and material due to even feeding of upper and lower materials.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LowVerRuffler3.jpg "V" Ruffler Top Quality Low Vertical Screw-on
$29.95
Fits vertical low shank machines comes with instructions.
This attachment offers a simple and effective way to make gathered and pleated ruffles. Ruffles may be made seperately or made and applied at the same time. The ruffler is attached to the machine in place of the regular presser foot and is used with a
"straight stitch center needle position setting only".
For ruffling, pleating and gathering.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SnapOnQuarterEdgeFoot.jpg Type "B" Snap-on 1/4" Edge Foot #P60613 (Bin B-40)
$14.95
For low vertical machines, use in straight stitch ONLY.
1/4" quilting foot with black guide on right toe for straight top stitching and edge stitching. Quilters use it to guide seams as they piece quilt blocks.
Place edge of fabric blocks against flange guide and straight stitch.
ADD BASIC S&H


   
ScrewOnQuarterEdgeFoot.jpg "V" "B" Screw-on 1/4" Edge Foot #P60610
$17.95
For low vertical machines, use in straight stitch ONLY.
1/4" quilting foot with black guide on right toe for straight top stitching and edge stitching. Quilters use it to guide seams as they piece quilt blocks.
Place edge of fabric blocks against flange guide and straight stitch.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SnapOnOvercastFoot2.jpg Type "B" Overedge Edging Foot (E, J) (bin B-20)
$12.95
Has small bar on foot which helps hold the edge of the fabric down to prevent curling. Overedge stitches over the bar (make sure zig-zag is set wide enough to cross over bar).
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ScrewOnStitchinthe Ditch.jpg Type "A" "B" Low Vertical Stitch In A Ditch Foot (bin B-30)
$18.95
(P60706)
Multi function foot. Stitch In A Ditch / Edge / Joining Foot
Fits ALL low vertical machines.
Screw on ALL metal foot.
Has metal bar in the center forward position to guide and/or separate fabric.
Stitch in a ditch (topstitching) method; Set machine on straight stitch center needle position. Foot guides stitches into previous sewn seam.
Edging method; Set machine on straight stitch left needle position. Use metal bar as guide for top stitching on the edge of the fabric or wide pintuck.
Joining (Spanish hemstitching) method; Foot helps separate two pieces of fabric or trim (lace) using zig-zag or decorative stitch (i.e. feather stitch)
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BlindHemGaugeBinB19.jpg Type "B" Snap-on Adjustable Blind-hem Gauge/Guide (bin B-19)
$8.95
(357990)(SA133)(006904008)(XC1957-002)
For precise stitch placement on blind-hems.
ADD BASIC S&H


   
SnapOnRollerFoot.jpg Type "A" "B" Snap-on Roller Foot (bin B-22)
$8.95
Works on difficult to feed fabrics, like leather, vinyl or going over uneven seams.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ScrewOnRollerFoot2.jpg "V" Roller Foot Screw-on #1854
$8.95
Works on difficult to feed fabrics, like leather, vinyl or going over uneven seams.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ScrewOnBeadingFoot2.jpg Type "A" "B" "V" Beading Foot Screw-on (bin B-39)
$16.95
(P60835)
Screw-on type beading foot
For attaching beads, pearls and piping.
Sews on beads up to 5mm, sews corded pin tucks, sews piping 1/8", 1/4" & 3/8" (for piping your machine must have a left or right needle position).
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BMulti-CordingCouchingFtBinB18.jpg Type "B" Multi-Cording Couching Foot (bin B-18)
$4.95
(5011-13)(006813008)
Multi-Cording Couching Foot
Has a slot on the entry of the foot to run and guide small cord through. Cord attaches with small zig-zag.
Stitch one, two or three decorative threads (crochet type thread) to create one of a kind embellishment. Use guide opening in front of foot and zig-zag or multi-zig-zag (mending stitch) to secure threads to fabric.
ADD BASIC S&H


   
SnapOnButtonSewOnBlueFt.jpg Type "B" Sew-on-Button Foot (bin B-27)
$4.95
(5011-9)(006914008)(X59375-051)
Used to stablize botton when using zig-zag to sew on buttons.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
VDoubleGatheringScrewOnFt006917008.jpg Type “B” "V" Double Gathering/Shirring Screw-on Foot #006917008
$12.95
(P60502
Fits ALL low vertical machines Singer, Brother, Kenmore White etc.
Gather fabric or gather and attach a ruffle in one step.
Suitable for light to medium weight fabrics.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
AB5GroveSnapOnPintuckFt20009108.jpg Type "A" "B" Five Grove Snap-On Pintuck Foot #20009108
$11.95
Snap-on five grove pintuck foot.
Create a raised or rolled effect on light weight fabrics. Used in conjunction with twin needle 2.mm/80 Schmitz (click on "Twin Needles")
ADD BASIC S&H


   
BV5GroveScrewOnPintuckFtB24.jpg Type "B" "V" Five Grove Screw-On Pintuck Foot (bin B-24) 701L
$8.95
Comes complete screw-on with shank.
Create a raised or rolled effect on light weight fabrics.
Used in conjunction with twin needle 2.mm/80 Schmitz (click on "Twin Needles")
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
AB7GroveSnapOnPintuckFt200005104.jpg Type "A" "B" Seven Grove Snap-On Pintuck Foot #200005104
$11.95
Snap-on seven grove pintuck foot. Create a raised or rolled effect on light weight fabrics. Used in conjunction with twin needle 2.mm/80 Schmitz (click on "Twin Needles")
ADD BASIC S&H


   
7GroveScrewOnPintuckFtB25.jpg Type "B" "V" Seven Grove Screw-On Pintuck Foot (bin B-25) P60815***
$0.00
***Temporarily Out of Stock*** please reorder when this message has been removed
Comes complete screw-on with shank.
Create a raised or rolled effect on light weight fabrics.
Used in conjunction with a twin needle 1.6mm/80 Schmetz (click on "Twin Needles")
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
LowVerticalCordingFeet.jpg Low Vertical Piping, Cording, Welting Foot Kit (Bin-103)
$48.95
Low Vertical Screw-on Piping, Cording, Welting Foot Kit
Kit comes with: 1/8", 3/16", 1/4", 3/8" and 1/2" feet.
For sewing single piping, cording and welting.
Set machine for straight stitch in the center needle position ONLY. Fold the fabric over the desired cording or use pre-purchased (pre-made) decorative cording. Stitching (needle) will be on the right side of the cording, cording will be feed through the foot on the left side.
Fits ALL low vertical CENTER needle position machines
Viking: Groups (5), (6), (7), (01), (A), (B)
Bernina: Must use Bernina Adapter OS (feet) Standard #0019477000 or Bernina Adapter NS (feet) #75 Standard #0083677200
Kenmore: All low vertical
Kenmore Super High: MUST use adapter P60666 center needle position for left needle machines you will also need to use Spacer Kit #4.
ADD BASIC S&H


   
VScrewOnSingleDoublePipingFt2.jpg "V" "A" "B" Screw-on Single/Double Piping Foot
$16.95
Screw-on
For sewing on single or double corded tape. Can be used for piping, cording and welting.
Set machine for straight stitch in the center needle position ONLY.
Fold fabric over the desired size piping, you can use either the left or the right grove for single piping application.
Additional instructions provided with this foot. Please note: This foot is sold in three different sizes.
Each is sold separately, $16.95 each.
On the shopping cart instructions please indicate the size you want 1/8", 3/16", 1/4"
If no size is given we will send (one) size 1/4".
ADD BASIC S&H


   
ABSnaponDoubleWeltCordFoot200002008.jpg Type "A" "B" Snap-on Double or Single 1/4" Welt Cording Foot #200002008
$18.95
(P60490)(P6069J)
Works on "A"B" type snap on shank
Sew in center needle position ONLY
ADD BASIC S&H


   
ABSnapOnBinderB23.jpg Type "A" "B" Snap-on Binder (bin B-23)
$12.95
Pre-cut (15/16") or package binding tape runs through front scroll of foot and rolls the tape over the raw edge of the fabric to create 1/4" binding.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
VAdjustableTapeBindingFt6287.jpg "V" Adjustable Tape Binding Foot #6287-PD (55622-LP)
$12.95
Screw-on adjustable tape binding foot for wider selection of binding tape, pre-cut or packaged, bias tape MUST be in a three fold prior to applying to fabric.
Selection of tape width is possible within 3mm (1/8") to 20mm (3/4")
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BOneEighthSnapOnHemmerFtB17.jpg Type "B" 1/8" Snap-on Hemmer Foot (bin B-17)
$11.95
(006900008)(SA126)
Great for shirt-tail type hem on light to medium fabrics.
For center needle position machines or machines which can be adjusted for center needle position.
ADD BASIC S&H


   
HemmerFootScrewOn.jpg "V" Hemmer Foot Screw-on 1/4" 6mm #P60001(161671- 1/4")
$11.95
1/4" (6mm) hemmer foot.
Creates a rolled hem by rolling the edge of the fabric down and under as it stitches.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
HemmerFootScrewOn.jpg "V" Hemmer Foot Screw-on 3/16" 4mm #P60005(161671- 3/16")
$11.95
3/16" (4mm) hemmer foot.
Creates a rolled hem by rolling the edge of the fabric down and under as it stitches.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
HemmerFootSet.jpg Hemmer Foot Set #0290 (A)(B) Snap-on, 3 Sizes
$29.95
Hemmer foot set creates a down and under folded edge (double hem) for light to medium fabrics
Kit includes 3 sizes: 1/2" (4/8), 3/4" (6/8), 1" (8/8)
Fits low vertical machines using "A" "B" snap-on type system
Singer, Brother, White Kenmore, Janome, New Home and others
Note: Photo is showing the finished results only using the 1" (8/8) hemmer foot
Comes with directions
ADD BASIC S&H


   
VABScrewOnFellingFt4mmP60960.jpg "V" "A" "B" Screw-on Metal Felling Foot 4mm #P60960
$16.95
Fits all low vertical systems
Screw-on metal narrow 4mm wide flat felled seams. Is used to durably join two pieces of fabric in a two stitch operation. Has many practical functions.
This stitch is most recognizable on the seams of jeans.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
VABScrewOnFellingFt6mmP60970.jpg "V" "A" "B" Screw-on Plastic Felling Foot 6mm #P60970
$15.95
Fits all low vertical systems
Screw-on transparent (plastic) 6mm wide flat felled seams. Is used to durably join two pieces of fabric in a two stitch operation. Has many practical functions.
This stitch is most recognizable on the seams of jeans.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
fringefoot1895.gif "V" "A" "B" Fringe / Tailor Tack Foot #1895
$15.95
Solid screw-on fringe/tailor tack foot.
Set machine on zig-zag, decrease upper tension.
The zig-zag stitches over the raised bar and creates your own fringe on top or the edge of the fabric.
Also saves time transferring pattern marking onto fabric as a tailor tack.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ad1929S.gif Type "B" Buttonmatic Foot #1929L
$0.00
NO LONGER AVAILABLE
Low shank screw-on foot.
For machines with four step (A-B-C-D) built-in buttonhole system. Insert the button you are using on the garment into the gague slot on the side to determin the size of the buttonhole.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ButtonholeFoot1149.jpg Type "B" Buttonhole Gauge Foot (bin B-26)
$7.95
(5011-8)(Singer #006174008)(Bro. #X59369-051)
For machines with four step (A-B-C-D) built-in buttonhole system. Has small line on the left side of the foot for determining size of button,
Fits Singer 3709, 3722, 6510, 2623 and many others.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ad5011-8ft.gif Type "A" "B" Buttonhole Foot #820801005 (BR)
$6.95
For machines with or without a built-in buttonhole system. Transparent with groves for tracking buttonhole alignment (used mostly for manual bar-tac buttonholes).
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
ad128215081.gif Type "A" "B" One-Step Automatic Buttonhole Foot #XA4911151 BR
$15.95
(1282015)(128215081)(128215051)(128215-001)(128215-051)(XD1792031)(XA4973151)(X51205102)
Fits Brother: PS3700, PX100, PX200, PX300, XL2015, XL2021, XL2022, XL2025, XL2027, XL2030, XL3000, XL3010, XL3022, XL3025, XL3030, XL3099, XL3100, XL3200, XL5010, XL5011, XL5020, XL5021, XL5022, XL5030, XL5031, XL5060, XL5070, XL5130, XL5232, XL5300, XL5340, XL5600, XL5700, XL6562, XR23, XR33, XR34, XR35, XR37, XR40
Also for VX790 will need type "B" snap-on shank #5011-1
Babylock: BL37, BL713, BL722, BL1556, BL2150. BL2160, BL6150
Riccar: R1950 & R2050
Simplicity: SL8130, SL8220
For dedicated machines with one step built-in buttonhole system ONLY. Placing the button in the rear of the automatic buttonhole foot automatically sets the buttonhole size. Please consult your manual for compatibility.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
B1stepbuttonholeftX57789101.gif Type "B" Brother Snap-On One-Step Buttonhole Foot (bin B-35)
$18.95
(X57789101)(129881-001)(A)
Fits Brother: CS8072, NV4000D, PC2800, PC3000, PC5000, PC6000, PC6500, PC7000, PC7500, PC8200, PC8500, ULT2001, ULT2002, ULT2003 and others.
Snap-on foot, insert button, lower buttonhole lever, size is determined by button.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
BbuttonholeftXC2691-051.gif Type "B" Brother Snap-On One-Step Buttonhole Foot (bin B-36)
$18.95
(XC2691-051)(XC2691-021)(A)
Fits Brother: CS8060, CS8150, CS6000, NX200, NX400, NX600, SE270D
Snap-on foot, insert button, lower buttonhole lever, size is determined by button.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SingerOneStepButtonhole76620.jpg Singer One-Step Buttonhole Foot #76620
$14.95
Singer snap-on one step buttonhole foot
Fits Singer: 7422, 7424, 7426, 7442, 7444, 7446, 7462, 7464, 7466, 7468
The size is automatically set by placing the button in the rear of the buttonhole foot. This foot works ONLY with machines having the one-step built-in buttonhole system.
Please consult your operators manual.
ADD BASIC S&H


   
Singer One-Step Buttonhole Foot #006171008 (006Q6A0150)
$24.95
One-step buttonhole foot for models with one-step built in automatic buttonhole systems.
Fits Singer models: 3810, 3820, 3825, 7312, 7322, 7360, 7380, 950DE, 995D2, 996D2 and others.
Insert desired button into back of foot for buttonhole size.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
S1stepbuttonholeft358120.gif Singer Inspiration One-Step Buttonhole Foot (bin B-33) 358120
$29.95
Singer snap-on one step buttonhole foot for Inspiration models: 4206, 4212, 4220, 4228
Insert button into foot to determine the buttonhole size.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
VikingEmeraldOneStepButtonhole4163041-01.jpg Husqvarna Viking Emerald / EuroPro Presser Foot (Bin-64-B-C-R) (C) (D)(3) One-Step Buttonhole #416 30 41-01
$29.95
(006102008)(416 21 78-01)
Fits Viking: Emerald 183, 203, Huskystar "B" C-10, C-20
Euro-Pro 9110
The size is automatically set by placing the button in the rear of the buttonhole foot. This foot works ONLY with machines having the one-step built-in buttonhole system.
Please consult your operators manual.
ADD BASIC S&H


   
bh954.gif "V" Greist/Singer Buttonholer #954 (1-Z)(160506)(489500)(Gr)
$29.95
VERY LIMITED SUPPLY
No Longer Available as new must be removed from a machine in our inventory. This buttonholer is refurbished (used)
For all center needle low vertical machines, straight stitch or zig-zag. Attachment moves the fabric back and forth.
Not happy with your built-in buttonhole system?
You will find the Greist/Singer Buttonholer, which has been around many years, a great alternative.
Attach to machine with large screw, included, in place of your regular presser foot. Insert template of desired size and style for uniform buttonholes every time.
Note: Must drop feed dogs or use feed cover plate supplied with your machine or use the plate supplied with this attachment.
A set of five templates are furnished with the attachment: 5/16", 5/8", 13/16", 1 1/16", for straight buttonholes; and 1 1/16" for keyhole type. Keyhole buttonholes are usually placed in suits and coats.
Not available for high shank, must use adapter #Fastube-A
Brother LS series: LS1217, LS1520, LS1717, LS2125 and other LS series machines will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly
This item does not qualify for the $35.00 free freight offer. It is F/I Freight Intensive.
On the order page choose $8.95 for S&H

[Add to Cart]  [View Cart]

   
Ssidecutter2.gif Edge Cutter / Side Cutter 555790
$39.95
(P1010037)(R-CT2DX)(X81028-001)
Fits most low vertical shank Singer, Brother, Kenmore, White, New Home and other popular makes.
Easy to operate; remove your existing presser foot and shank and screw on the one piece cutting system. New style with guide marks. Also comes with an optional needle clamp screw (your model may not need this screw) and instructions.
The side cutter is an attachment that will trim the excess material while sewing using a zig-zag or overlock stitch which is built into your sewing machine. Works best with firm medium weight fabric.
Will not fit Kenmore super high, Singer slant or other high vertical shank machines.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
AdjustableHolder2.jpg Adjustable Holder (Bin 1) Low Shank (screw-on)
$9.95
Adjustable holder ONLY
Fits low vertical screw-on or snap-on presser foot system. Replace your regular presser foot with the adjustable holder. To be used with the adjustable hemmers, edgestitcher and binder. A small amount of adjustments can be obtained from this system allowing for a more precise stitch placement. This adjustment can also compensate for models with a straight stitch in the left or center needle position.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
AdjustableHolder2.jpg Adjustable Holder (Bin 2) High Shank (screw-on)
$9.95
Adjustable holder ONLY
Fits high vertical (not for Kenmore super high, see Bin 3)screw-on or snap-on presser foot system. Replace your regular presser foot with the adjustable holder. To be used with the adjustable hemmers, edgestitcher and binder. A small amount of adjustments can be obtained from this system allowing for a more precise stitch placement. This adjustment can also compensate for models with a straight stitch in the left or center needle position.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Binder.jpg Binder Attachment for "Adjustable Holder"
$12.95
Binder Attachment for your appropriate "Adjustable Holder".
The binder is used to apply bias binding you cut yourself or commercial binding to over lap the edges of your fabric to be sewn in one operation. Both edges of the bias binding will fold neately down and under.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Hemmerkit-holder.jpg Hemmer Attachment Kit (size 1/4", 3/8", 5/8", 7/8") for "Adjustable Holder"
$35.95
Hemmer Attachment Kit for your appropriate "Adjustable Holder"
Kit contains sizes 1/4 inch, 3/8 inch, 5/8 inch and 7/8 inch hemmer feet. This is for the four feet, you will also need to order the appropriate "Adjustable Holder".
Achieve professionally finished hems in four different sizes for a variety of sewing functions.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Narrowhemmer-holder.jpg Hemmer 1/4" for "Adjustable Holder"****
$0.00
No Longer Available
1/4" hemmer for your approiate "Adjustable Holder"
Stitches a narrow hem on the edge of fine fabrics. Approximate 1/4" slight variations can be obtained by moving the hemmer left or right. The scroll will turn the raw edge of the fabric neately down and under. You can also attach lace, rick-rack and other trim at the same time you are making a narrow hem.
Additional directions will be provided with this item.
This foot (1/4") is also included in hemmer attachment kit, see below.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
Edgestitch-holder.jpg Edgestitcher Attachment for "Adjustable Holder"****No Longer Available****
$0.00
****No Longer Available****
Edgestitcher attachment for your appropriate "Adjustable Holder".
A useful foot when sewing lace or other trim to the edge of the fabric. The edgestitcher has 5 different slots to help feed and stitch a variety of sewing functions.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
SingerNeedle3Pack.jpg Singer Needles - 3 Pack 11-14-16 "ON SALE NOW"
$11.95
Regular price $14.85
Three packs of needles 10 per pack.
One 10 pack of size 11 for light weight fabrics.
One 10 pack of size 14 for medium weight fabrics.
One 10 pack of size 16 for heavy weight fabrics.
Singer "TOP QUALITY" needles with sharp points for maximum needle power penetration, hardened for durability, polished for smooth operation and less heat build up.
Singer needles for Singer and most other sewing machines.
Packaging may vary depending on present inventory.
ADD BASIS S&H


   
tweezersTWE6p.gif Tweezers #TWE6
$3.95
Top quality tweezers with guide pin
6" long with bent point design.
The best tool in your accessory box. Ideal for threading needles on sewing machines and needles and loopers on sergers. Many other practical sewing uses: removing thread and lint build-up from small areas in the sewing machine, pulling out unwanted stitches, etc.
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
opermankitp.gif Operator Maintenance Kit
$12.95
*High quality oil in refillable extendable spout. Long neck spout style of oiler #NK2 may vary depending on availability.
*Lubricant for gears
*Lint brush
*Extra fine quality screw driver for tension adjustments
*2 strips of crocus cloth for removing burs on hook, etc.
*6" abrasive cord #52 for removing burs in and around needle plate, etc.
*Oil and lubricant instructions pamphlet for various models
ADD BASIC S&H
[Add to Cart]  [View Cart]

   
MinatureDriverSet.jpg Mini Precision Screwdriver Set (Bin T-4)
$12.95
Small compact set includes convenient bit holder
Set includes 18 different bit ends: Slotted: 1/8", 3/32", 5/64", 5/64", 1/16"
Phillips: PH000, PH00, PH00, PH0, PH1
Torx star: T4, T5, T6, T7, T8, T9, T10, T15
Depending on current inventory this item may very in color and / or brand
ADD BASIC S&H


   
DriverSetWithOffsetRatchet.jpg Small Tools, Driver Set with Offset Ratchet (Bin-T-1)
$24.95
Sewing machine and other small appliances require different tools than your car or home
This set is a great place to start
Set contains one each: reversible ratchet handle, spinner screwdriver handle, 3 1/4" extension handle
One each of the following bits
Slotted screwdriver: 1/8", 1/4"
Phillips screwdriver: PH#1, PH#2
Hex: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4",
Torx: T6, T8, T10, T15, T20, T25
ADD BASIC S&H


   
TorxLongNarrowBody.jpg Torx Bit Set 5" Long with Thin Shaft (Bin T-2)****No Longer Available****
$0.00
****No Longer Available****
Sewing machine and other appliances require a long thin shaft for getting into confined areas
5" long with a standard 1/4" hex shaft
Set includes one each: T6, T7, T8, T9, T10, T15, T25, T30, T40
ADD BASIC S&H


   
Small Torx.JPG Torx Bit Set Small (Bin T-3)
$13.95
Hard to find Torx bits, standard 1/4" hex shaft
Set includes: T4, T5, T6, T7, T8, T9, T10, T15, T20, T25
ADD BASIC S&H


   
P606015 Type "B" Wide Screw-on 1/4" Foot with Right Edge Guide #P60615 (bin B-41-A)
$17.95
Screw-on wide 1/4" edge stitching foot with black right built in edge guide.
Black guide is 1/4" from the needle stitch line.
Set machine for straight stitch center needle position.
"Our choice for Kenmore Conversion".
ADD BASIC S&H




We sell hundreds of parts a day all over the WORLD. Our number one goal is to provide our customers with functional working replacement parts at the most competitive prices. There have been many sewing machine manufacturers over the years, most of course no longer exist and most companies no longer manufacture their own replacement parts.
Most of our replacement parts are new and after market parts, some used or refurbished depending on availability. We must rely on many sources to fill the tremendous need. Our choices are always made with your satisfaction in mind...
John



Email: sewingmachine221sale@pop.bizland.com
This web site is owned and operated by:
Discount Sewing Machine Service ©2000
Site contains material that are trademark TM and servicemark SM.
All material is for personal use only and is not to be mass produced.
Pages constructed and maintained by Kas