Vertical Low Screw-on Zig-Zag Foot #1723
$4.95
(9363)(200618)(8522)(40390)(735503007)(67514)(8522)(735503018)(45563)(65770)(650504002)
This screw-on system has been used for many years. It is a standard vertical low system.
Foot attaches with thumb screw.
Height of foot approx. 3/4".
For modern conversion snap-on shank #5011-1 allowing for a wider selection of pressure feet click on "B" feet.
Type "B" Pressure Feet
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Kenmore Super High (slant) Zig-Zag Foot #55551
$19.95
(DPX44985KM)(35040)(42063)(34478)(33123)(28565)
This system is unique in allowing the feet to be changed utilizing a lever located on the back of the presser foot bar. Height of the foot is approximately 1 3/8". Most feet for this system are in limited supply (see below) or no longer available.
SPECIAL NOTE: For machines using snap-on presser foot shanks part #56481 (consult manual) you have a super high system. Such as model numbers: 158.14000, 158.15810, 158.16010, 158.16011, 158.16012, 158.16013, 158.16020, 158.16021, 158.16030, 158.16031, 158.16250, 158.16410, 158.16800, 158.16801, 158.16820, 158.16900, 158.17010, 158.17011, 158.17012, 158.17030, 158.17031, 158.17032, 158.17033, 158.17600, 158.17651, 158.17800, 158.17810, 158.17811, 158.17812, 158.17820, 158.17821, 158.17830, 158.17840, 158.17841, 158.17850, 158.17860, 158.17871, 158.17891, 158.17892, 158.17910, 158.17920, 158.17921, 158.17922, 158.1793182, 158.18000, 158.18010, 158.18011, 158.18020, 158.18021, 158.18022, 158.18023, 158.18024, 158.18030, 158.18031, 158.18032, 158.18033, 158.18034, 158.18130, 158.18131, 158.18140, 158.18141, 158.18150, 158.18800, 158.19130, 158.19131, 158.19140, 158.19141, 158.19142, 158.19310, 158.19311, 158.19312, 158.19411, 158.19412, 158.19800, 158.19801, 158.19802.
An adapter #P60666 (see below) is now available to allow you to use a wide variety of new and modern feet.
For additional Kenmore Super High (slant) Feet please click on this link
Kenmore Super High (slant) Feet
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Adapter (Kenmore) #P60666
$15.95
P60666
Super high adapter. This adapter will allow you to use new snap-on shank #804509000 which will make it possible to use "B" type feet, offering a wider selection of available feet. Screw included
This adapter comes with Kenmore Super High Conversion Kit / Type "B"
For feet compatible with "B" (#29347) shank click on Type "B" Pressure Feet
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Type "A" Snap-on Master Bracket #804509000
$12.95
(823509000)(823504004)(56475)(11191)
Most new Kenmore's and many other brands are now using this snap-on system (no longer necessary to remove the screw to change feet).
LOW VERTICAL foot with shank measuring approximately 3/4" high.
Snap-on master bracket low vertical for top loading machines, features lock button for non-pivoting foot functions.
Kenmore 385 series top loading low shank, some 158 series. (Can be used on super high shank using adapter #P60666)
Fits New Home: low shank fits: 3500, 4000, 4800, 5100, 5500, 6000, 7000, 7500. (for high shank order #380038004)
Viking: Husky Star 219/224. Necchi top loading bobbin, Necchi Omega and many others. Please consult your manual for compatibility.
Does NOT come with zig-zag foot, see #825510021
Does NOT come with presser foot screw, see 286-S
To view available feet click on
Type "A" Pressure Feet
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Type "A" HIGH SHANK Snap-on Master Bracket #830038004
$14.95
(830504017)
Snap-on master bracket for:
New Home series ONLY 5000, 5700, 8000, 9000, 10000 high shank.
Kenmore 385.19000, 385.19000690, 385.19001, 385.19005, 385.19010, 385.19001890
Use zig-zag foot #825510021 and ALL Type "A" snap-on feet. For presser feet which do not snap-on choose High Vertical.
Does NOT come with zig-zag foot, see #825510021
Does NOT come with presser foot screw, see 286-S
NOTE: NOT for Kenmore super high system.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Type "A" Zig-zag Foot #832523007LOCK
$7.95
(822508005)(825510021)(685502019)
Standard "A" zig-zag foot. Use this foot for straight and zig-zag stitching. Transparent front for better vision. Black button on the right side of the foot sets the foot to remain rigid so that you can sew on heavy fabrics.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Vertical HIGH Zig-Zag Foot #1731 (4607)(200501)
$5.95
This system could be found on some older style Kenmore's, Brother's and others.
High shank standard zig-zag foot.
Attaches with thumb screw.
Height of foot approx. 1 1/4".
For modern conversion snap-on shank #5011-2 allowing a wider selection of pressure feet click on "B" feet.
Type "B" Pressure Feet or
High Shank Screw-on Feet
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Adjustable Seam Guide #55415
$3.95
For extra help in keeping seams straight, particularly beneficial for quilters and other sewing functions requiring accurate stitch placement. For sewing machines having a screw hole in the bed of the machine on the right side of the needle plate.
Leading edge of guide is 5/8" wide and the adjusting is 1 5/8" long.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Pressure Foot Screw #286-S (Bin-04)(1-32)(416 03 02-01)
$3.95
(354135-452)(504030)(KM135)(647112009)(004106211)(Viking 411 19 97-01)
Standard for most models including Singer, Viking 6000 series and older, Brother, White, Kenmore and many other models including type "A", "B", vertical low & high.
Will fit older Viking (A)(B) HuskyStar series, (01) 2000, 3000, 6000 series.
This screw is also used to hold on the side cover plate and the back plate on some older Singer models
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
LOW VERTICAL Even Feed / Walking Foot (Bin LVWF)
$29.95
LOW VERTICAL (3/4" height of your existing presser foot)
Remove your existing presser foot and shank to attach a walking foot. Instructions for attaching this foot will be provided.
Fits low vertical machine including the following: Alphasew, BabyLock, Bernette, Brother, EuroPro, Janome,
Kenmore (excluding Super High see RWA-8),
Necchi, Riccar, Simplicity,
Singer (excluding Slant see #421333-451),
Viking HuskyStar, White
The walking foot (even feed/dual feed) is designed to feed the top and bottom layers of the fabric at the same time. The feed teeth on the foot work in conjunction with the feed teeth on the sewing machine moving the layers in unison. Use this foot for difficult to feed fabrics: bulky, plaids, slippery, batting or quilted fabrics. In most sewing applications set your machine for straight stitch center needle position.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Type "A" Walking/Even Feed Foot (KM/NH) (HIGH) #214504008
$39.95
(KM#214507001)(9312)(9305)
Comes with quilter bar
Kenmore: 385.19000, 385.19001, 385.19005, 385,19010, 385.193200 high shank models ONLY.
New Home / Janome: fits 4000 series, 5000 series, 8000 series, 9000 series. 10000, 10001
NOT for older Kenmore super high shank, use RWA-8
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Kenmore Long Attachment Screw "B" #2337
$16.95
Needle clamp attachment screw for walking foot, free motion foot & ruffler for Kenmore super high shank machines where there is no arm to activate the fork (arm) of the attachment, it is necessary for you to use the "B" screw.
For Kenmore super high shank with needle clamp screw in front.
This "B" attachment screw does not hold the needle in, it is only an activating screw for the feet that have a fork to activate the foot.
The "B" screw will screw into the right side of the needle clamp.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Free Motion/Darning Foot #P60994(161876)
$19.95
For vertical low presser foot system ("A") ("B") (1723)
Heavy-duty metal ankle with transparent foot for darning, quilting, embroidery, monograming etc.
Allowes the operator to move the work freely while stabilizing the fabric. Works by mounting in place of the regular pressure foot with a fork wrapped around the needle clamp screw for a spring movement.
Will NOT fit super high shank.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Open Toe Low Vertical Free Motion/Darning Foot (bin B-14)
$19.95
(P60432)(654805008)
LOW VERTICAL (3/4" height of your existing presser foot)
Remove your existing presser foot and shank to attach a walking foot. Instructions for attaching this foot will be provided.
Fits low vertical machine including the following: Alphasew, BabyLock, Bernette, Brother, EuroPro, Janome,
Kenmore (excluding Super High see RWA-8),
Necchi, Riccar, Simplicity,
Singer (excluding Slant see #421333-451),
Viking HuskyStar, White
New style open toe, larger contact area, all metal.
For all low vertical feet machines including extra wide 7mm zig-zag.
Free motion, darning, embroidery, monogramming, stippling and quilters foot.
Including many Brothers such as VX series, XL series, XR series, CS8072, PC2800 and PC6000.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Type "B" Free Motion/Darning Foot Low Vertical (bin B-13)
$15.95
(1814)(P60432)(SA129)(XC1948-002)(X81021-002)
LOW VERTICAL (3/4" height of your existing presser foot)
Remove your existing presser foot and shank to attach a walking foot. Instructions for attaching this foot will be provided.
Fits low vertical machine including the following: Alphasew, BabyLock, Bernette, Brother, EuroPro, Janome
Kenmore (excluding Super High see RWA-8),
Necchi, Riccar, Simplicity
Singer (excluding Slant see #421333-451),
Viking HuskyStar, White
For all low vertical zig-zag machines including extra wide 7mm zig-zag.
Transparent closed front foot with metal rod for darning, quilting, stippling, embroidery, monogramming, etc.
Allows the operator to move the work freely while stabilizing the fabric. Works by mounting in place of the regular pressure foot, with a fork positioned over the needle clamp screw for a spring movement.
Including many Brothers such as VX series, XL series, XR series, CS8060, CS8072, CS8150, PC2800 and PC6000.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Free Motion Kit (Bin-21)
$19.95
Free Motion kit includes :
6" top quality sewing machine hoop with heavy duty screw mechanism.
Collins #C28 vanishing marker for tracing or marking on fabric.
Sulky #751-03 tear away stabilizer (20" X 3 yards).
Sulky #405-01 super water soluble stabilizer (19 1/2" X 36").
Monogramming alphabet set (traceable & reusable).
Stippling practice patterns (9 patterns traceable & reusable).
Additional instructions included
Click on this link to learn more about “Free Motion Sewing”
This item does NOT qualify for FREE S&H it is freight intensive F/I.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Quilters Low Patchwork Foot #P60600G
$14.95
Metal foot with 1/4" and 1/8" seam allowance
Not available for Kenmore super high shank, must use adaptor P60666
For center needle position machines or machines which can be adjusted for center needle position.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Kenmore Little Foot #LF-101
$24.95
Little Foot low vertical screw-on
Produced in clear Lexan with red line markings for greater visiblity for ALL you machine piecing.
The right edge 1/4" from center needle position which gives you an exact 1/4" seam allowance.
The left edge is a scant 3/8" from center needle position. This gives a better tension control as it will cover more feed dogs on most machines. Perfect for machine piecing.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" "B" Screw-on 1/4" Edge Foot #P60610
$17.95
For low vertical machines, use in straight stitch ONLY.
1/4" quilting foot with black guide on right toe for straight top stitching and edge stitching. Quilters use it to guide seams as they piece quilt blocks.
Place edge of fabric blocks against flange guide and straight stitch.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Type "A" "B" Low Vertical Stitch In A Ditch Foot (bin B-30)
$18.95
(P60706)
Multi function foot. Stitch In A Ditch / Edge / Joining Foot
Fits ALL low vertical machines.
Screw on ALL metal foot.
Has metal bar in the center forward position to guide and/or separate fabric.
Stitch in a ditch (topstitching) method; Set machine on straight stitch center needle position. Foot guides stitches into previous sewn seam.
Edging method; Set machine on straight stitch left needle position. Use metal bar as guide for top stitching on the edge of the fabric or wide pintuck.
Joining (Spanish hemstitching) method; Foot helps separate two pieces of fabric or trim (lace) using zig-zag or decorative stitch (i.e. feather stitch)
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"Q" Foot Low Shank #6870T-P (P60791)(5616)(9368T-P)(1718)(42679)
$14.95
New style with open front for better viewing
Low shank "Q" and applique foot, transparent (T-P).
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Schmetz Stretch Needles "Q" Type
$4.95
$4.95 for a pack of 5
130/705 H.S. (stretch) size 11/75 fine weight.
130/705 H.S. (stretch) size 14/90 medium weight.
Please specify size on shopping cart instructions.
These needles are designed to be used when sewing knits and difficult synthetic fabrics.
Use this needle if you experience skipped stitches.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Kenmore Invisable Zipper Foot Vertical Low #6757 (941100000)
$15.95
Regular, invisable zipper foot and/or cording foot for low vertical system.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" "B" Screw-on Adjustable Low Vertical Zipper Foot (bin B-12a)
$14.95
(55510)(1805)(6792)(593401008)(161127)
ALL METAL
This foot has the shank attached and moves from side to side.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" "B" Screw-on Adustable Narrow Teflon Zipper Foot #V/G-7961 (bin B-12b)
$14.95
(5510T)
Fits low vertical shank machines.
This teflon designed foot sews better on hard to feed fabrics, such as nylon, plastic and leather.
This foot is designed to facilitate the placement of stitching close to a raised edge: zipper insertion, corded seams, tubular cording, slipcover welting and similar applications.
The screw on the back allows you to adjust the foot very close to the work area either on the left or the right of the needle.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Type "A" Regular and Invisible Zipper Foot #820811008 (E)****
$0.00
No Longer Available
Snap-on regular and invisible zipper foot, extra wide with back locking bar to stabilize foot.
Three mounting pins for left, center and right stitching.
For invisible zipper foot see, Type "A" or "B" Invisible Zipper Foot #5011-11
For regular zipper foot see, Type "A" Zipper Foot #829801001
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Type "A" Zipper Foot #829801002 (01)(200015107)(97741)(E)
$9.95
Snap-on zipper foot right and left, no back bar allows front toe to pivot up.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" Roller Foot Screw-on #1854
$8.95
Works on difficult to feed fabrics, like leather, vinyl or going over uneven seams.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" "A" "B" Fringe / Tailor Tack Foot #1895
$15.95
Solid screw-on fringe/tailor tack foot.
Set machine on zig-zag, decrease upper tension.
The zig-zag stitches over the raised bar and creates your own fringe on top or the edge of the fabric.
Also saves time transferring pattern marking onto fabric as a tailor tack.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" Buttonhole Guide Foot Low Vertical Screw-on #828ML-N
$8.95
(1828BR)(47149)(648801108)(214369)(6854)(60854)
For low vertical shank system, screw-on.
Screw-on buttonhole guide foot. For machine with 2 step or 4 step built-in buttonhole systems.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Kenmore Buttonhole Guide Foot High Shank #828MH-N
$9.95
(6855) (1829BR)
Older style vertical high shank system.
Screw on buttonhole guide foot for machines with 2 step or 4 step built-in buttonhole guide systems.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Kenmore Buttonhole (low vertical) Foot #213503015PD (42679)****NLA****
$0.00
****No Longer Available****
For low vertical system ONLY
Large plastic foot to be used with automatic buttonhole guide plate
Fits many models such as 385.16528000, 385.1653000 and older models such as 158.16600
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" Greist/Singer Buttonholer #954 (1-Z)(160506)(489500)(Gr)
$29.95
VERY LIMITED SUPPLY
No Longer Available as new must be removed from a machine in our inventory. This buttonholer is refurbished (used)
For all center needle low vertical machines, straight stitch or zig-zag. Attachment moves the fabric back and forth.
Not happy with your built-in buttonhole system?
You will find the Greist/Singer Buttonholer, which has been around many years, a great alternative.
Attach to machine with large screw, included, in place of your regular presser foot. Insert template of desired size and style for uniform buttonholes every time.
Note: Must drop feed dogs or use feed cover plate supplied with your machine or use the plate supplied with this attachment.
A set of five templates are furnished with the attachment: 5/16", 5/8", 13/16", 1 1/16", for straight buttonholes; and 1 1/16" for keyhole type. Keyhole buttonholes are usually placed in suits and coats.
Not available for high shank, must use adapter #Fastube-A
Brother LS series: LS1217, LS1520, LS1717, LS2125 and other LS series machines will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly
This item does not qualify for the $35.00 free freight offer. It is
F/I Freight Intensive.
On the order page choose $8.95 for S&H
[Add to Cart]
[View Cart]
|
"V" Hemmer Foot Screw-on 1/4" 6mm #P60001(161671- 1/4")
$11.95
1/4" (6mm) hemmer foot.
Creates a rolled hem by rolling the edge of the fabric down and under as it stitches.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" Hemmer Foot Screw-on 3/16" 4mm #P60005(161671- 3/16")
$11.95
3/16" (4mm) hemmer foot.
Creates a rolled hem by rolling the edge of the fabric down and under as it stitches.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Adjustable Holder (Bin 1) Low Shank (screw-on)
$9.95
Adjustable holder ONLY
Fits low vertical screw-on or snap-on presser foot system. Replace your regular presser foot with the adjustable holder. To be used with the adjustable hemmers, edgestitcher and binder. A small amount of adjustments can be obtained from this system allowing for a more precise stitch placement. This adjustment can also compensate for models with a straight stitch in the left or center needle position.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Adjustable Holder (Bin 2) High Shank (screw-on)
$9.95
Adjustable holder ONLY
Fits high vertical (not for Kenmore super high, see Bin 3)screw-on or snap-on presser foot system. Replace your regular presser foot with the adjustable holder. To be used with the adjustable hemmers, edgestitcher and binder. A small amount of adjustments can be obtained from this system allowing for a more precise stitch placement. This adjustment can also compensate for models with a straight stitch in the left or center needle position.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Hemmer 1/4" for "Adjustable Holder"****
$0.00
No Longer Available
1/4" hemmer for your approiate "Adjustable Holder"
Stitches a narrow hem on the edge of fine fabrics. Approximate 1/4" slight variations can be obtained by moving the hemmer left or right. The scroll will turn the raw edge of the fabric neately down and under. You can also attach lace, rick-rack and other trim at the same time you are making a narrow hem.
Additional directions will be provided with this item.
This foot (1/4") is also included in hemmer attachment kit, see below.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Hemmer Attachment Kit (size 1/4", 3/8", 5/8", 7/8") for "Adjustable Holder"
$35.95
Hemmer Attachment Kit for your appropriate "Adjustable Holder"
Kit contains sizes 1/4 inch, 3/8 inch, 5/8 inch and 7/8 inch hemmer feet. This is for the four feet, you will also need to order the appropriate "Adjustable Holder".
Achieve professionally finished hems in four different sizes for a variety of sewing functions.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Binder Attachment for "Adjustable Holder"
$12.95
Binder Attachment for your appropriate "Adjustable Holder".
The binder is used to apply bias binding you cut yourself or commercial binding to over lap the edges of your fabric to be sewn in one operation. Both edges of the bias binding will fold neately down and under.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Edgestitcher Attachment for "Adjustable Holder"****No Longer Available****
$0.00
****No Longer Available****
Edgestitcher attachment for your appropriate "Adjustable Holder".
A useful foot when sewing lace or other trim to the edge of the fabric. The edgestitcher has 5 different slots to help feed and stitch a variety of sewing functions.
Additional directions will be provided with this item.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Ruffler #1019 High Vertical LEFT (55620)
$39.95
Left needle position ONLY
High vertical presser foot system:
This attachment offers a simple and effective way to make gathered and pleated ruffles. Ruffles may be made seperately or made and applied at the same time. The ruffler is attached to the machine in place of the regular presser foot and is used with a straight stitch setting only.
For Ruffling, pleating and gathering.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Edge Cutter / Side Cutter 555790
$39.95
(P1010037)(R-CT2DX)(X81028-001)
Fits most low vertical shank Singer, Brother, Kenmore, White, New Home and other popular makes.
Easy to operate; remove your existing presser foot and shank and screw on the one piece cutting system. New style with guide marks. Also comes with an optional needle clamp screw (your model may not need this screw) and instructions.
The side cutter is an attachment that will trim the excess material while sewing using a zig-zag or overlock stitch which is built into your sewing machine. Works best with firm medium weight fabric.
Will not fit Kenmore super high, Singer slant or other high vertical shank machines.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Ruffler #995 OS High Vertical CENTER (55642)
$39.95
Center needle position ONLY
High vertical presser foot system:
This attachment offers a simple and effective way to make gathered and pleated ruffles. Ruffles may be made seperately or made and applied at the same time. The ruffler is attached to the machine in place of the regular presser foot and is used with a straight stitch setting only.
For Ruffling, pleating and gathering.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
4 Inch Embroidery Scissors
$12.95
4" embroidery scissors
Fine sharp point ideal for close work in small areas
CAUTION: As in most cutting instruments the point and blades are sharp and should be handled ONLY by adults for cutting and craft use.
packaging and brand may vary
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Operator Maintenance Kit
$12.95
*High quality oil in refillable extendable spout. Long neck spout style of oiler #NK2 may vary depending on availability.
*Lubricant for gears
*Lint brush
*Extra fine quality screw driver for tension adjustments
*2 strips of crocus cloth for removing burs on hook, etc.
*6" abrasive cord #52 for removing burs in and around needle plate, etc.
*Oil and lubricant instructions pamphlet for various models
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Spacer Kit #4 (3 in a pack)
$3.95
Spacer kit #4 is used for machines that sew a straight stitch in the left needle position.
These spacers are positioned on the inside of the mounting portion of the presser foot there-by moving the toe of the foot to the center.
The kit contains 3 spacers of which your particular machine may take a combination of 1, 2 or 3
ADD BASIC S&H
|
"V" Ruffler Top Quality Low Vertical Screw-on
$29.95
Fits vertical low shank machines comes with instructions.
This attachment offers a simple and effective way to make gathered and pleated ruffles. Ruffles may be made seperately or made and applied at the same time. The ruffler is attached to the machine in place of the regular presser foot and is used with a
"straight stitch center needle position setting only".
For ruffling, pleating and gathering.
Brothers with short needle clamp screw such as Needle Clamp XA0643151 (XA0643051) fitting models: LS1217, LS1520, LS1717, LS2125, VX1120, VX1125, VX1140, VX1250, VX2240, will also need to order Needle Clamp Attachment Screw #54635 "A" for this foot to work correctly.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
"V" Screw-on Quilters 1/4" Patchwork Foot #P60600G (035932)
$14.95
Metal, 1/4" with 1/8" seam allowance. 1/4" scale front to back.
Low vertical with quliting guide, can be moved to right or left side.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Hemmer Foot Set #0290 (A)(B) Snap-on, 3 Sizes
$29.95
Hemmer foot set creates a down and under folded edge (double hem) for light to medium fabrics
Kit includes 3 sizes: 1/2" (4/8), 3/4" (6/8), 1" (8/8)
Fits low vertical machines using "A" "B" snap-on type system
Singer, Brother, White Kenmore, Janome, New Home and others
Note: Photo is showing the finished results only using the 1" (8/8) hemmer foot
Comes with directions
ADD BASIC S&H
|
Low Vertical Piping, Cording, Welting Foot Kit (Bin-103)
$48.95
Low Vertical Screw-on Piping, Cording, Welting Foot Kit
Kit comes with: 1/8", 3/16", 1/4", 3/8" and 1/2" feet.
For sewing single piping, cording and welting.
Set machine for straight stitch in the center needle position ONLY. Fold the fabric over the desired cording or use pre-purchased (pre-made) decorative cording. Stitching (needle) will be on the right side of the cording, cording will be feed through the foot on the left side.
Fits ALL low vertical CENTER needle position machines
Viking: Groups (5), (6), (7), (01), (A), (B)
Bernina: Must use Bernina Adapter OS (feet) Standard #0019477000 or Bernina Adapter NS (feet) #75 Standard #0083677200
Kenmore: All low vertical
Kenmore Super High: MUST use adapter P60666 center needle position for left needle machines you will also need to use Spacer Kit #4.
ADD BASIC S&H
|
Straight Stitch Pressure Foot #1727
$3.95
(45321)(3333)(6872)(6873)(DP67550)(241155)(650802014)
The original non-hinged straight stitch foot numbers (015281)(15281) is No Longer Available
Fits low vertical shank machines. Singer, Kenmore, Brother and many others.
LOW VERTICAL foot with shank measuring approximately 3/4" high.
For many additional Treadle & Vintage Presser Feet click on this link.
ADD BASIC S&H
|
Singer Needles - 3 Pack 11-14-16 "ON SALE NOW"
$11.95
Regular price $14.85
Three packs of needles 10 per pack.
One 10 pack of size 11 for light weight fabrics.
One 10 pack of size 14 for medium weight fabrics.
One 10 pack of size 16 for heavy weight fabrics.
Singer "TOP QUALITY" needles with sharp points for maximum needle power penetration, hardened for durability, polished for smooth operation and less heat build up.
Singer needles for Singer and most other sewing machines.
Packaging may vary depending on present inventory.
ADD BASIS S&H
|
Free Motion Guide Grip
$39.95
Fits ALL machines.
No need to place your fabric in a hoop for free-motion sewing. Place on top of fabric for free-motion, quilting, embroidery or monogramming. The friction surface on the underside of the guide grip holds the fabric taut and provides handles for moving the fabric. Set your machine for normal free-motion sewing according to your operators manual.
Note: For free-arm models works best with your sewing machine extension plate attached.
Some fabrics especially light weight fabrics may require a stabilizer. Some projects may require the conventional two piece wood hoop.
NOTE: For additional information click on this link "How to do Free Motion Sewing"
This item is Freight Intensive (F/I), $8.95 is the basic S&H for ALL Freight Intensive (F/I) items
[Add to Cart]
[View Cart]
|
Tweezers #TWE6
$3.95
Top quality tweezers with guide pin
6" long with bent point design.
The best tool in your accessory box. Ideal for threading needles on sewing machines and needles and loopers on sergers. Many other practical sewing uses: removing thread and lint build-up from small areas in the sewing machine, pulling out unwanted stitches, etc.
ADD BASIC S&H
[Add to Cart]
[View Cart]
|
Mini Precision Screwdriver Set (Bin T-4)
$12.95
Small compact set includes convenient bit holder
Set includes 18 different bit ends:
Slotted: 1/8", 3/32", 5/64", 5/64", 1/16"
Phillips: PH000, PH00, PH00, PH0, PH1
Torx star: T4, T5, T6, T7, T8, T9, T10, T15
Depending on current inventory this item may very in color and / or brand
ADD BASIC S&H
|
Small Tools, Driver Set with Offset Ratchet (Bin-T-1)
$24.95
Sewing machine and other small appliances require different tools than your car or home
This set is a great place to start
Set contains one each: reversible ratchet handle, spinner screwdriver handle, 3 1/4" extension handle
One each of the following bits
Slotted screwdriver: 1/8", 1/4"
Phillips screwdriver: PH#1, PH#2
Hex: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4",
Torx: T6, T8, T10, T15, T20, T25
ADD BASIC S&H
|
Torx Bit Set 5" Long with Thin Shaft (Bin T-2)****No Longer Available****
$0.00
****No Longer Available****
Sewing machine and other appliances require a long thin shaft for getting into confined areas
5" long with a standard 1/4" hex shaft
Set includes one each: T6, T7, T8, T9, T10, T15, T25, T30, T40
ADD BASIC S&H
|
Torx Bit Set Small (Bin T-3)
$13.95
Hard to find Torx bits, standard 1/4" hex shaft
Set includes: T4, T5, T6, T7, T8, T9, T10, T15, T20, T25
ADD BASIC S&H
|
