Anatomy of a Needle   Brother Parts   Brother Feet   Brother / White Foot Controls   Brother/White Bobbin Cases, Bobbins   Brother Tension Complete   Serger (overlock) Parts

google5993c5666b5daeec.html BROTHER Brother Needle Plates, Bobbin Cover Plates & Feed Cover Plates It is very common to have nicks and burrs on the needle plate due to the close proximity of the needle entering the hole in the needle plate. It is important to remove the nicks and burrs which could cause puckering, snagging of the fabric and/or thread, thread looping and/or breaking. If you cannot remove the nicks and burrs from the damaged needle plate it must be replaced. For additional information click on FREE Service Removing Burrs     No-Screw Down Zig-Zag Needle Plate #Z11063 (NZ5LG) $12.95 Fits many side loading zig-zag machines. Does not require screws to be held in place, screws are quide pins. Measures approx. 1 3/4" left to right, 2 1/2" top to bottom For Brother, Necchi, New Home, Riccar and others. ADD BASIC S&H       Combination Slide Plate and Zig-Zag Needle Plate #15147/NZ2LG $22.95 This is a substitute slide and needle plate for Z95CT (listed below) which is No Longer Available attached to the needle plate. The slide plate has a spring located under it which slides under the casting of the machine. Sold Complete ONLY Fits: Kenmore, White and others (NSZ1)(NSZ1) Fits: Kenmore 158.12270, 158.321, 158.504 and some 148 series side loading zig-zag machines. White 162, 363, 366, 463, 466, 468, 599, 609, 628, 629, 685, 765, 1265, 1466, 2031, 2034, 2035, 2134, 2335, 3051, 3052, 3851, 3954, 3955, 6957, 8931, 9951. Morse and many others common Japanese made machines. ADD BASIC S&H       Combination Slide Plate and Zig-Zag Needle Plate #Z95CT**** $0.00 No Longer Available Fits: Kenmore, White and others (NSZ1)(NSZ1) Spring "Up-Down" Combination Slide Plate and Zig-Zag Needle Plate Sold Complete ONLY Fits: Kenmore 158.12270 and some 148 series side loading zig-zag machines. White 162, 363, 366, 463, 466, 468, 599, 609, 628, 629, 685, 765, 1265, 1466, 2031, 2034, 2035, 2134, 2335, 3051, 3052, 3851, 3954, 3955, 6957, 8931, 9951. Morse and many others common Japanese made machinrs. Same over all measurements as needle plate #58501 and slide plate #15147. ADD BASIC S&H       Singer Slide Plate #15147 (125338)(15188) $9.95 Comes complete with spring #2824. Fits models: 15-30, 15-86, 15-87, 15-88, 15-90, 15-91, 15-96, 15-97, 15-125, 15CL, 115, 115-1, 193, 194, 237, 238, 239, 293B. Alphasew: HA1 Dressmaker: S-1000 Brother: 320, 461, 761, XL711 Janome (New Home): 446, 534, 552 Kenmore: 158.130, 158.13010, 158.13011, 158.13031, 158.13032, 158.13033, 158.13041, 158.220, 158.221, 158.320, 158.321, 158.330, 158.331, 158.350, 158.351, 158.352, 158.353, 158.370, 158.371, 158.372, 158.373, 158.4180, 158.430, 158.431, 158.432, 158.433, 158.440, 158.441, 158.442, 158.443, 158.444, 158.445, 158.460, 158.461, 158.462, 158.463, 158.470, 158.471, 158.472, 158.473, 158.480, 158.481, 158.500, 158.501, 158.502, 158.503, 158.504, 158.505, 158.620, 158.650, 158.750, 158.841, 158.842 Riccaar: 601, 608, SZ702 White: 1044, 944 Measures approximately 2 1/2" X 2 7/8" Plate has shinny finish. Please see front and back as viewed. Please note: This plate fits many more models not listed ADD BASIC S&H       Brother & Other Brand Zig-zag Needle Plate #120817 BR *** $0.00 ***Temporarily Out of Stock*** please reorder when this message has been removed 6 point feed Approximately 2 1/2" left to right and 1 3/4" front to back. Fits: Brother (Pacesetter) 110, 190, 210, 211, 230, 280, 290, 451, 741, 761, (461, 751), 991, 1241, 1400L, 8005, FA19, Fleetwood, XL711S, XL771S, XL791 Please note the 6 point feed system Other plates are available for Brother and other models. If you do not see your plate listed please send an e-photo of the plate in the flat position and we will research for you. ADD BASIC S&H       Brother NZ3LG (B4139) Zig-Zag Needle Plate $9.95 Zig-zag needle plate, no screw down, 1 3/4" wide X 2 1/2 long Fits: Brother JA-1, 110, 181, 190, 210, 991, 2100, 21005 and other common Japanese made machines. ADD BASIC S&H       Brother Needle Plate Screw #X50487051 $2.95 (X50487001)(X50487021) Fits Brother: CS8060, CS8100, CS8150, CS8200,Innovis 40 (NS40), LS1217, LS1520, LS2125, LS2720, LS2725, LS2820, LS2825, LS2920, NV4000D (Innov-is NV-4000D), NX200 (Innov-is NX-200), NX400 (Innov-is NX-400), NX600 (Innov-is NX-600), PC2800, PC3000, PC5000, PC6000, PC6500, PC7000, PC7500, PC8000, PC8895, PC8200, PC8500, PE100, PE150, PE180D, PE200, PE300S, PE400D, PS1000, PS1250, PS1700, PS1750, PS1800, PS1900, PS1950, PS2100, PS2200, PS2300, PS2500, PX100, PX150, PX200, PX300, RS15, RS25, RS35, ULT2001, ULT2002, VX1100, VX1120, VX1125, VX1140, VX1200, XL2010, XL2015, XL2021, XL2022, XL2030, XL3010, XL3022, XL3025, XL3027, XL3030, XL3100, XL3200, XL4010, XL4020, XL4030, XL4040, XL4050, XL4060, XL5010, XL5011, XL5012, XL5020, XL5021, XL5022, XL5031, XL5032, XL5050, XL5030, XL5060, XL5070, XL5100, XL5130, XL5200, XL5232, XL5300, XL5340, XL5500, XL5600, XL5700, XL6040, XL6050, XL6060, XL6452, XL6552, XR23, XR29, XR31, XR33, XR34, XR35, XR37, XR40, XR46 Babylock: B15, B17, B21, BL1556, BL2160, BL2100, BL2150, BL6000, BL6200, BL6300, BL6700, BL6800, BL9500, BLCC (Crafter's Choice), BLCC2 (Crafter's Choice), BLDC, BLMY (Melody), BLQC, BLG (Ellegante), BLG 2 (Ellegante 2), BLTP (Tempo), ESN, ESI, ESI2, EMI1, ESE, ESE2, ESG Ellageo, ESP (Espire), EM2, INT (Intrigue) Bernina: CS6000, Deco 500, Deco 600 White: W3300 ADD BASIC S&H     Singer / Brother Zig-zag Needle Plate #116585001 $39.95 (176874)(130967001)(NZ36LG)(123142001)(130936001) VERY LIMITED SUPPLY, No longer available as new must be removed from a machine in our inventory Zig-zag needle plate with springs Fits Singer Models: 3011, 3012, 3013, 3014, 3015, 4015, 4016, 4019, 4022, 5522, 5528, 5530 Fits Brother models: PS1200, VX520, VX560, XL700 series, VX757, VX760,VX800 series, VX809, VX 900 series, VX940, VX950, VX1100 series, VX1010, VX2051, 8015 and many others Fits Babylock models: BL200, BL702, BL713, BL722, BL1500, BL1550, BL2400, Companion 1550 & 2400 Fits Simplicity models: SL8020, SL8130, SL8220, SL9130, SL9150, SL9240 Please match plate with drawing Use feed dog #129373-051 ADD BASIC S&H       Singer / Brother Straight Stitch Plate #176875**** $0.00 ****NLA**** Compatible with zig-zag needle plate #116585001 ADD BASIC S&H       Singer / Brother Zig-zag Needle Plate, Stylist #312391PD (310706BR) $12.95 Singer needle plate for flat-bed and free-arm Singer: 502, 507, 509, 513, 514, 518, 522, 527, 533, 534, 538, 560 and other 500 stylist series, 802, 807, 809, 813, 814, 818, 822, 824, 827, 833, 834, 838, 844 and other 800 stylist series, 1022, 6100 series, 6500 series, 7100 free-arm series, 8600 series, 8734, 9600 series, Finesse Brother VX1005 and others. ADD BASIC S&H       Singer / Brother Straight Stitch Needle Plate #171392 Free-arm Stylist**** $0.00 No Longer Available Straight stitch needle plate compatible with zig-zag plate #312391 ADD BASIC S&H       Singer / Brother Feed Cover Plate (plastic) #312392SR (381459) $4.95 Singer plastic feed cover plate compatible with zig-zag plate #312391 ADD BASIC S&H       Brother / Singer Darning Plate #XA3443151 (131865-051) $12.95 (XA3442051)(XA3442151)(176647) Darning plate for machines with-out drop feed systems. Fits Brother: Campus 150, JS2130, 7029, LS1217, LS1520, LS1717, LS1817, LS2000, LS2020, LS2020P, LS2125, LS2125B, LS2125I, LS2129, LS2130, LS2150, LS2160, LS2220, LS2250PRW, LS2320, LS2300P, LS2300PRW, LS2350, LS2400, LS2720, LS2725, LS2820, LS2825, LS2920, LS30, LS3125, LX1700, LX2350, LX2375, LX3125, LX3125E, PC15, PS1200, PS21 Pacesetter, PX200, PX300, SL7, VX1010, VX1020, VX1120, VX1125, VX1140, VX1250, VX1400, VX1435, VX520, VX540, VX560, VX620, VX640, VX660, VX707, VX710, VX780, VX800, VX807, VX809, VX810, VX880, VX890, VX920, VX940, VX950, VX970, VX980, X5, XL2010, XL2015, XL2021, XL2022, XL2030, XL2031, XL3010, XL3022, XL3025, XL3027, XL3030, XL3100, XL3200, XL4010, XL4011, XL4012, XL4013, XL4014, XL4015, XL4020, XL4030, XL4040, XL4050, XL4060, XL5012, XL5021, XL5130, XL5032, XL5230, XL5232, XL5340, XL5500, XL5600, XL5700, XL6452, XR31, XR32, XR33, XR34, XR35, XR37, XR40, XR46C, XR52C, XR65, XR65T Babylock: BL1500, BL1556, BL2150, BL2160, BL6150, BL6600, BL702, BL713, BL722 Simplicity: SL6600, Sl8130, SL8220, SL9130, SL9240 Singer: 5500, 5528, 5530 Compatible with zig-zag needle plate #X57911051 ADD BASIC S&H       Brother Zig-zag Needle Plate #XA3954051 $18.95 ( XA3954021)(XA3954121) Fits: Brother JS-23, LS-30, LS-1217. LS-1520, LS-2125, LS-2125b, LS-2125i, LS-2129, LS-2130, LS-2150, LS-2160, LS-2220, LS-2720, LS-2725, LS-2820, LS-2825, LS-2920, LX-3125, LX-3125e, RS15, RS25, RS35, SL-7, VX-1435, X-5, XL5010, XL5011, XL5012, XL5020, XL5021, XL5022, XL5031, XL5032, XL5050, XL5030, XL5060, XL5070, XL5100, XL5130, XL5200, XL5232, XL5300, XL5340, XL5500, XL5600, XL5700, PX100, PX150, PX200, PX300, VX-1435 Babylock: B15, B17, B21 May also fit some VX1100 series (VX1120) Please note: This plate uses two screws to mount it to the machine, some models may use #XA0647051 requiring only one screw for mounting. Use feed cover plate #131865-051 ADD BASIC S&H       Brother Zig-zag Needle Plate #XA0647051****No Longer Available**** $0.00 ****No Longer Available**** Fits: VX1120, VX1125, VX1140, VX1250 and others requiring this plate. Please note: This plate uses only one screw (left side) to mount it to the machine, some models may use #XA3954051 requiring two screws for mounting. Use feed cover plate #131865-051 ADD BASIC S&H       Brother Zig-zag Needle Plate #X54373051**** $0.00 No Longer Available Fits: Brother XL2010, XL2015, XL2021, XL2022, XL2030, XL2031 and other models requiring this plate. ADD BASIC S&H       Brother / Babylock Zig-zag Needle Plate #X57911051 $22.95 Fits: Brother VX1100, VX1200, XL3010, XL3022, XL3025, XL3027, XL3030, XL3100, XL3200, XL4010, XL4020, XL4030, XL4040, XL4050, XL4060, XR31, XR33, XR34, XR35, XR37, XR40, Boutique and other models requiring this plate. Babylock: BL1556, BL2160 ADD BASIC S&H       Brother / Babylock Straight Stitch Needle Plate #XC1645051 $29.95 (XA6466051) Needle plate ONLY Fits Brother: PQ1300, PQ1500, PQ1500S Babylock: BL500A (Jane), BLQP (Quilters Choice Pro) Compatible with bobbin cover plate #XC1270051 ADD BASIC S&H       Brother Zig-Zag Needle Plate #XC8565031 (XC8566)(61) $19.95 Brother needle plate with position bracket on the underside. Compatible with needle plate cover (position bracket) #XC3520021. Fits: BC2100, BC2300, CE4000, CE5000, CS4000, CS6000, CS6000T, CS6000i, CS100t, Comfort 60E, ES2000, ES2010, ES2020, ES2200, ES2210, ES2220, EX-660, RS240 and other models requiring this plate. ADD BASIC S&H       Brother Zig-zag Needle Plate (metal) #XC8990121 $29.95 Brother zig-zag needle plate complete with under attached position bracket Has markings in inches and centimeters. Fits many Brother models including: XL2600, XL2610, XL3500, XL3500T, XL3510, XL3520, BM2600, BM3500, L25, L35, S25, S27 Also fits other models not listed. Please examine the "actual photograph" viewed to compare with your existing needle plate. Compatible with #XC3520021 (needle plate cover) and #XC8983001 (bobbin cover). ADD BASIC S&H       White Zig-Zag Needle Plate #6693**** $0.00 No Longer Available (NZ600LG)(370035000)(350035000) Fits: White 221, 1418, 1455, 1477, 1488, 1499, 1620, 1630, 1632, 1666, 1680, 1777, 1788, 1866, 1888, 2660, 7000, 7621 White new style Necchi: 3205FA Free Arm, 3355 Elna: 149, 200, 220, 225, 225i, 230, 240, 244, 244i, 250, 254, 254i, 255, 255I ADD BASIC S&H       Husqvarna Viking / Babylock / White / Euro-Pro Zig-Zag Needle Plate #7688 $19.95 (250006007) Fits: Babylock: BL1556, BL1750 Elna: 230, 2003, 2005, 2007 Euro-Pro: Shark 384 Viking: 140, 160, 165 Riccar: R700 & R1100 Simplicity: S02, S07, S110, S210, SA200, SL237, SA1100, SA1500, SA2200, SL2507, SW2145 White 1515, 1525 ADD BASIC S&H       White (1405) Zig-ZAg Needle Plate $9.95 Fits: White 1405, 1407, 1409 ADD BASIC S&H       Husqvarna Viking / Babylock / Simplicity Needle Plate #250006770 $19.95 (7688) Fits: Babylock Models: BL1556 & BL1750 Elna Models: 230, 2003, 2005 & 2007 Husqvarna Viking Models: 140 & 160 Riccar Models: R700 & R1100 Simplicity Models: S02, S07, S110, S210, SA200, SL237, SA1100, SA1500, SA2200, SL2507 & SW2145 ADD BASIC S&H       Brother Needle Plate (A) #XE9329001 $11.95 Fits Brother: LX2500, SV170 Please note: Manufacturers small notch cut out of the left portion of needle plate. This is to allow stitches to flow through the machine in the left needle position. Takes Slide plate XE9331001 below. ADD BASIC S&H     Brother / Babylock Needle Plate (A) #XE1827201 $29.95 (XE1828)(XE1827001) Fits Brother: HE240,Innovis 40 (NS40), LB6770, LB-6800PRW, NS-40, NV900 (Innov-ís 900), NV900D (Innov-ís 900D), SE-350, SE-400 Babylock: BL40, BL40A (Grace), BL137A2 (Sofia 2) ADD BASIC S&H     Singer / Brother Straight Stitch Needle Plate #15280 (125113-851)(352266) $9.95 New style with markings Fits Singer: 15 class, 15-30, 239, HA-1, HA-2 Brother and many other straight stitch side loading bobbin machines Approximately 2 1/2" X 1 3/4" ADD BASIC S&H       Brother / Babylock Bobbin Cover Plate #XC1270051 $17.95 Bobbin cover plate comes with spring clip attaches to the needle plate #XC1645051 (sold separately) Fits: Brother: PQ1300, PQ1500, PQ1500S Babylock: BL500A (Jane), BLQP (Quilters Choice Pro)     Brother Zig-zag Needle Plate #XA8715051 (XA8058)****No Longer Available**** $0.00 ****No Longer Available**** Brother needle plate comes complete with bobbin cover plate #XA8061051 Fits: XL6040 series, XL6050 series, XL6060 series, XL6452, XL6562, XR46, XR52, XR65 ADD BASIC S&H       Brother Bobbin Cover Plate #XA8061051 $12.95 Bobbin cover plate (transparent) for Brother XR46, XR52, XR65, XL6252, XL6450, XL6452, XL6562 ADD BASIC S&H       Brother Zig-zag Needle Plate #XA9438001 (XA9844)(XA9438101)****NLA**** $0.00 ****No Longer Available**** Fits: Brother ULT2002D, ULT2001/2003, Galaxie 3000, Babylock BBL, and USG Use bobbin cover plate #X56828151 below, not included. ADD BASIC S&H       Brother Zig-Zag Needle Plate #XA21150001 (XA2916151/051)****No Longer Available**** $0.00 ****No Longer Available**** Fits: CS8072, CS80, PC2800, PC3000, PC6000, PC6500, PC8200, PC8500, Super 2100, Babylock ESE/2, ESP Takes bobbin cover plate #X56828151 ADD BASIC S&H       Brother Zig-ZAg Needle Plate #X59896051 $29.95 Fits: Brother 8100, BBL, B349, B351, B352, My Star 15, PS1800, PS950, PS2100, PS2150 Comes with bobbin cover plate X56828151 ADD BASIC S&H       Brother Bobbin Cover Plate #X56828151 $6.95 (XD1646051)(XD1646021)(XD1643051) Quickset bobbin TYPE bobbin cover plate (transparent). Fits: Brother 895, B373, B377, CS8072, PC1900, PC1950, PC2800, PC3000, PC4000, PC5000, PC6000, PC6500, PC7000, PC7500, PC8000, PC8200, PC8500, PC8895, PE150, PE150E, PE15V, PE100, PE150, PE180D, PE200, PE300S, PE400D, PE8200, PE8500, PS53, PS55, PS57, PS1000, PS1250, PS1800, PS1900, PS1950, PS2000, PS2100, PS2200, PS2250, PS2300, PS2360, PS2470, PS2500, PS3100, PS3700, PS3720, Star 110, Star 120E, Star 130E, Star 140E, Super Galaxie 2000, Super Galaxie 3000, ULT2001, ULT2002, ULT2002D, ULT2003 Pacesetter, ULT2003D, VX950, XRX55 Babylock: B347, B348, B373, B375, B376, B377, BL37, BL60E, BL6200, BL6300, BL6600, BL6700, BL7800, BL9500, EAC, EM1, EM2, ESE, ESE2, ESG, ESG2, ESG3, ESI, ESI2, ESL, ESN, ESP (Espire), EM2, Star10/2000, STAR15/20, MY STAR15, 110, 120E, 130E, 140E, R3100, DIANA, USG Bernina: Deco 600 Riccar: R3100, R3200 Simplicity: SE1, SE2, SE3 Husqvarna Viking: 300E, EM10 White: 4400, W3300 ADD BASIC S&H       Brother Needle Plate Cover XA9939-051 (32) $12.95 Needle plate cover (feed cover) Fits: Brother ULT2001, ULT2002 ADD BASIC S&H       Brother Zig-Zag Needle Plate #XA0332051**** $0.00 ****No Longer Available**** Fits: Brother PS1000, PS1250 3 9/16" (90mm) long X 2 15/16" (75mm) wide. Please Note: This plate looks like plate #X55858251 belo./ Make sure to check your model number and the measurements before you order this plate. Compatible with bobbin cover plate #137727051 ADD BASIC S&H       Brother Zig-Zag Needle Plate #X55858251****NLA**** $0.00 ****No Longer Available**** Fits Brother PS1750 3 5/16" (84mm) long X 2 15/16" (75mm) wide. Please Note: This plate looks like plate #XA0332051 above. Make sure to check your model number and the measurements before you order this plate. Compatible with bobbin cover plate #137727051 ADD BASIC S&H       Brother Bobbin Cover Plate #137727051 (XD1643051)****NLA**** $0.00 No Longer Available This is a transparent slide-on bobbin cover plate. Fits Brother: 845, PS1000, PS1250, PS1700, PS1750, PS1800, XL-3000, Sonata Compu-Sew, Sonota 6680C Babylock: BL2100, Bl2150, BL6000, BL6150, BL6200, BL7500, BL8000, BL8500 Sonata: Sew-Easy 6621 ADD BASIC S&H       Brother Needle Plate Cover (Posititon Bracket)(#1)(#30) #XC3520121 $29.95 (XC3520021)(XC8981021)(XC8983021) Fits: B349, B351, B352, BC1000, BC2100, BC2300, BC2500, CE4000, CS80, CS100t, CS4000, CS5000H, CS6000, CS6000b, CS6000i, CS6000t, CS8000 series, CS8100 series, comfort 40E, comfort 60E, ES2000, ES 2000t, ES2010, ES2020, ES2200, ES2210, ES2220, ES2400, ES2410, ES2420, EX-660, HS1000, NC21-S2, NC21-S3, NX200, NX400, NX600, RS240, RS250, RS260, SE270D, XL2600, XL2610, XL2620, XL3500, XL3500T, XL3510, XL3520, XR7700 Needle plate cover comes with bobbin cover #XD1645021. This snap-out plate also serves as a position bracket for the bobbin case. ADD BASIC S&H       Brother Bobbin Cover Plate #XC8983001 (XD1645021) $5.95 (XC2369021)(XC2369051)(XC3636021)(XC898300)(XC8983021)(XD1645021)(XD1645051)(XE1645021) Bobbin cover plate (transparent) Fits Brother: BC2100, BC2300, BC2500, BM2600, BM3500, CE-4000, CE5000, CE5000PRW, CE5500, CE5500PRW, comfort 40E, comfort 60E, CP6500, CP7500, CS80, CS100, CS100t, CS770, CS4000, CS6000, CS6000i, CS6000t, CS8000, CS8060, CS8000 series, CS8100, CS8150, CS8100 series, CS8200, DS120, DS140, ES2000, ES2010, ES2020, ES2200, ES2210, ES220, ES2400, ES2410, ES2420, EX660, FS20, FS40, FS40WT, HE240, HS2000, HS2500, Innovís 40 (NS40), L25, L35, LB6800PRW, LS590, NC21S2, NC21S3, NV1000, NV2500D, NV4000D, NV500D, NX200, NX400, NX600, PC210, PC210PRW, RS240, RS260, Star 3, SE270D, SE-350, SE-400, SQ-9000, XL2120, XL2121, XL2130, XL2140, XL2150, XL2220, XL2230, XL2240, XL2250, XL2600, XL2600i, XL2610, XL2620, XL3500, XL3500T, XL3510, XL3520, XL3750, XL3800, XR4040, XR7700 Babylock: BL40, BL40A (Grace), BL200A (Elizabeth), BLG (Ellegante), BLG2 (Ellegante 2), BLMY (Melody), BLN (Esante), BLR, BLCC (Crafter's Choice), BLCC2 (Crafter's Choice), BLDC, BLDC2 (Decorator's Choice), BLQC, BLSO (Ellisimo), BLTP (Tempo) & INT (Intrigue). Please view actual picture to the left. ADD BASIC S&H       Singer / White Zig-zag Needle Plate #168618 (168032)****No Longer Available**** $0.00 ****No Longer Available**** Fits: Singer 4166 White 1730, 1740, 2037, 2999 Takes bobbin cover plate #760003, below ADD BASIC S&H       Singer / White Bobbin Cover Plate #760003 (4166) $6.95 Fits: White 1730, 1740, 750, 2037, 2999 Singer 4166 and others requiring this plate Compatible with needle plate #168618, above ADD BASIC S&H       Singer Bobbin Cover Plate #087340 $4.95 (87340)(87295)(85164)(141000729)(270087456) Transparent shuttle race (bobbin) cover Fits Singer: 160, 1500, 2009, 2662, 2638, 2639, 3962, 6518, 7256, 7258, 7422, 7424, 7426, 7430, 7436, 7442, 7444, 7446, 7462, 7463, 7464, 7466, 7467, 7468, 7469, 7469Q, 7470, 8763, 8770, 8780, CE-100, CE-150, CE-200, CE-250, CE-350, SES1000, SES2000 Juki: HZL-35Z White:970, 972, 979 Compatible with needle plate #076103, #086992, #051046 ADD BASIC S&H       Brother Bobbin Cover Slide Plate #XE933101 (XF2404001) $14.95 Fits Brother: BB370, BM2800, BM2800CT, BM2800FG, BM3550FG, BM3700, BM3700CT, BM3700FG, BM3850, BM3850CT, GS2700, GS2786K, GS3700, GS3710, GS3740C, Hanami 27s, Hanami 37S, J17, JX2517, LS17, LX-2500, LX2763, LX3850, RS40S, RS45S, SM3701, Star 27S, Star 37S, SV170, XM3700, XQ2700, XQ3700, XR53 ADD BASIC S&H     Brother Needle Plate #XC0614021 $39.95 (XC0615) Fits: PS2250, PS2360, PS2470, PS2473, PS3100 Comes with bobbin cover plate #X56828151 ADD BASIS S&H     Singer / Brother / White / Euro Pro Zig-zag Needle Plate # 416 3156-01 (E3A0255000) $19.95 (E3A025500)(E3A0046004)(E3A0253004)(0253004)(37) Fits Singer: 3709, 3722, 3810, 3820, 3825, 6510, 6550, 7312, 7322, 7350, 7360, 7380, 950D2, 950DE Euro Pro: 9110, 9125 White 3100 Come complete with under bracket and bobbin cover plate #NB1293000ns. Note: This is a new style needle plate, there is a notch cut out of the inside left side of plate (the old style did not have this notch). This will ONLY accept new style bobbin cover plate #NB1293000ns. ADD BASIC S&H       Singer / White / Viking / Euro Pro Bobbin Cover Plate #416156101 (NB1293000ns) (NB0243000) $5.95 Bobbin cover plate compatable with zig-zag needle plate #E3A0255000 Fits Singer: 3709, 3722, 3810, 3820, 3825, 6510, 6550, 7312, 7322, 7350, 7360, 7380, 950D2, 950DE Bernette: H70 Euro Pro: 9110, 9125, 9130 Necchi: 4825 Pfaff: 100S, 200C Viking: C10, C20, H-Class 100Q White 3100 ADD BASIC S&H       Brother / Dressmaker / Kenmore Feed Dog #FD24 (Bro. Z14157) $12.95 (71)(77163)(2-114)(2-24-1)(214157)(1243)(1283)(KM4627) Feed dog fits most side loading zig-zag sewing machines. Brother: 661, 671, 681, 1243, 1283, 1681, 1781 Dressmaker: Deluxe SWM1000, SWA2000, Automatic Super Zigzag Deluxe Kenmore 158.321, 158.504 Necchi: Supernova Mark II, 523 New Home: 532, 534 Riccar: 601, 608, R200, SZ702 White: 265, 944 ALSO fits machines using needle plate: Q107, Z-91-1, Z29, 10587, 77995, Z11063, NZ2LG, and others. Please examine your needle plate, the feed dog opening needs to match the feed dogs. ADD BASIC S&H     Feed Dogs #321065007 $12.95 (640026004) Fits Babylock: BL1050 & BL2800 Necchi: 514, 521, 524FA, 525FA, 5102 New Home: 222, 630H, 640, 844 Simplicity: SL1200, SL1250, SL1325, SL6950, & SL6220 Riccar: R200, R250, R1500, R1570, R1570FB, R1800, R1850, 7610, 7620 Tacony: FA693 White: 1407, 1411 & 1415 ADD BASIC S&H       Brother Feed Dog #FD-Z2****No Longer Available**** $0.00 ****No Longer Available**** Fits: 221, 320, 461, 761, XL711 ADD BASIC S&H     Brother / Babylock Feed Dog #X54389051 $24.95 Fits: Brother: XL4010, XL4020, XL4030, XL4050, XL4060, XL4040, XL2010, XL2015, XL2021, XL2022, XL2025, XL2030, XL3010, XL3022, XL3025, XL3027, XL3030, XL3100, XL3200, XR29, XR31, XR33, XR34, XR35, XR37, XR40, XR23, VX1100, VX1200 Babylock: BL1556, BL2160 ADD BASIC S&H     Brother Feed Dog #XA4430051 $8.95 (XA443002) Fits: LS-1520, LS-2125, LS-2125, LS-2125i, LS-2129, LS-2130, LS-2150, LS-2160, LS-2220, LS-2720, LS-2725, LS-2820, LS-2825, LS-2920, LX-3125, LX-3125e, RS15, RS25, RS35, VX1435, XL5010, XL5200, XL5232, XL5300, XL5340, XL5500, XL5600, XL5700, XL5011, XL5012, XL5020, XL5030, XL5060, XL5070, XL5100, XL5130, PX100, PX150, PX200, PX300, XL5021, XL5022, XL5031, XL5032, XL5050 ADD BASIC S&H     Singer Needles - 3 Pack 11-14-16 "ON SALE NOW" $11.95 Regular price $14.85 Three packs of needles 10 per pack. One 10 pack of size 11 for light weight fabrics. One 10 pack of size 14 for medium weight fabrics. One 10 pack of size 16 for heavy weight fabrics. Singer "TOP QUALITY" needles with sharp points for maximum needle power penetration, hardened for durability, polished for smooth operation and less heat build up. Singer needles for Singer and most other sewing machines. Packaging may vary depending on present inventory. ADD BASIS S&H     4 Inch Embroidery Scissors $12.95 4" embroidery scissors Fine sharp point ideal for close work in small areas CAUTION: As in most cutting instruments the point and blades are sharp and should be handled ONLY by adults for cutting and craft use. packaging and brand may vary ADD BASIC S&H       Operator Maintenance Kit $12.95 *High quality oil in refillable extendable spout. Long neck spout style of oiler #NK2 may vary depending on availability. *Lubricant for gears *Lint brush *Extra fine quality screw driver for tension adjustments *2 strips of crocus cloth for removing burs on hook, etc. *6" abrasive cord #52 for removing burs in and around needle plate, etc. *Oil and lubricant instructions pamphlet for various models ADD BASIC S&H       Tweezers #TWE6 $3.95 Top quality tweezers with guide pin 6" long with bent point design. The best tool in your accessory box. Ideal for threading needles on sewing machines and needles and loopers on sergers. Many other practical sewing uses: removing thread and lint build-up from small areas in the sewing machine, pulling out unwanted stitches, etc. ADD BASIC S&H       Free Motion Guide Grip $39.95 Fits ALL machines. No need to place your fabric in a hoop for free-motion sewing. Place on top of fabric for free-motion, quilting, embroidery or monogramming. The friction surface on the underside of the guide grip holds the fabric taut and provides handles for moving the fabric. Set your machine for normal free-motion sewing according to your operators manual. Note: For free-arm models works best with your sewing machine extension plate attached. Some fabrics especially light weight fabrics may require a stabilizer. Some projects may require the conventional two piece wood hoop. NOTE: For additional information click on this link "How to do Free Motion Sewing" This item is Freight Intensive (F/I), $8.95 is the basic S&H for ALL Freight Intensive (F/I) items       Mini Precision Screwdriver Set (Bin T-4) $12.95 Small compact set includes convenient bit holder Set includes 18 different bit ends: Slotted: 1/8", 3/32", 5/64", 5/64", 1/16" Phillips: PH000, PH00, PH00, PH0, PH1 Torx star: T4, T5, T6, T7, T8, T9, T10, T15 Depending on current inventory this item may very in color and / or brand ADD BASIC S&H     Small Tools, Driver Set with Offset Ratchet (Bin-T-1) $24.95 Sewing machine and other small appliances require different tools than your car or home This set is a great place to start Set contains one each: reversible ratchet handle, spinner screwdriver handle, 3 1/4" extension handle One each of the following bits Slotted screwdriver: 1/8", 1/4" Phillips screwdriver: PH#1, PH#2 Hex: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", Torx: T6, T8, T10, T15, T20, T25 ADD BASIC S&H     Torx Bit Set 5" Long with Thin Shaft (Bin T-2)****No Longer Available**** $0.00 ****No Longer Available**** Sewing machine and other appliances require a long thin shaft for getting into confined areas 5" long with a standard 1/4" hex shaft Set includes one each: T6, T7, T8, T9, T10, T15, T25, T30, T40 ADD BASIC S&H     Torx Bit Set Small (Bin T-3) $13.95 Hard to find Torx bits, standard 1/4" hex shaft Set includes: T4, T5, T6, T7, T8, T9, T10, T15, T20, T25 ADD BASIC S&H Email: sewingmachine221sale@pop.bizland.com This web site is owned and operated by: Discount Sewing Machine Service ©2000 Site contains material that are trademark TM and servicemark SM. All material is for personal use only and is not to be mass produced. Pages constructed and maintained by Kas