|
|
Singer Spool Pin #2007$3.95 Metal spool pin approximately 1 7/8" long. Fits most older Singers (drive-in) ADD BASIC S&H 
 |
Singer Spool Pin #173571 for Fashion-Mate (237) $3.95 1 3/4" long, plastic notched end (drive-in) spool pin. Fits: 237, 239, 242, 247, 252, 257, 258, 259, 285, 292, 360, 362, 1872, 1800 series, 6100 series and others. Can be used as replacement spool pin for #356942-453 which is No Longer Available (NLA) ADD BASIC S&H
|
Singer Spool Pin (457) #172007 for Stylist $3.95 Plastic beveled end (drive-in) spool pin. Fits: 327, 328, 329, 337, 338, 347, 348, 401, 403, 404, 413, 416, 418, 457, 466, 477, 478, 518, 522, 523, 527, 528, 534, 543. ADD BASIC S&H
|
Singer Spool Pin #356942-453 (Large)(311800)****NLA****$0.00 ****No Longer Available**** Plastic (drive-in) vertical spool pin. This spool pin is for the main spool holder and is also for twin needle sewing. Please note: This spool pin is approx. 2 3/4" long Replacement spool pin is #173571 which is ONLY 1 3/4" long, however it will work. Fits models: 2404, 2440, 2502, 2503, 2504, 2505, 2515, 2517, 2530, 2543, 3270, 3314, 3317, 3343, DX14 and other models not listed requiring this spool pin. ADD BASIC S&H
|
Spool Pin Felt #8879 Red (77040)$1.95 Red felt pad for vertical spool pins, helps to decrease noise and helps to control thread back lash. ADD BASIC S&H
|
Singer Needles - 3 Pack 11-14-16 "ON SALE NOW"$11.95 Regular price $14.85 Three packs of needles 10 per pack. One 10 pack of size 11 for light weight fabrics. One 10 pack of size 14 for medium weight fabrics. One 10 pack of size 16 for heavy weight fabrics. Singer "TOP QUALITY" needles with sharp points for maximum needle power penetration, hardened for durability, polished for smooth operation and less heat build up. Singer needles for Singer and most other sewing machines. Packaging may vary depending on present inventory. ADD BASIS S&H |
Spool Holder/Lead-off Sponge End #163149-004$5.95 Double sponge cushion for small, medium and large thread spools. For Singer 248, 288, 500 Stylist series, 600 series, 700 series, 800 Stylist series, 900 series,1030 series, 2000 series, 5500 series and others. Special Note: This item has a pressure spring located in the hole which makes it fit very tight onto the spool pin, it will install easier after repeated use. ADD BASIC S&H
|
Spool Seat Sponge End #163148-002(176655)$3.95 Spool seat (back side of thread spool) for above modles. ADD BASIC S&H
|
Spool Holder / Lead off #511113-456 $3.95 (179967-451)(179967-461)(507664-470)(507664-469) Double end for medium and large thread spools (does not require sponge cushion). For all new horizontal thread systems including Inspiration 343, 1482, 1485, 1486, 1488, 1490, 1492, 2102, 2105, 2106, 2108, 2110, 2112, 2114, 2118, 2440, 2502, 2503, 2504, 2505, 2515, 2517, 2530, 2543, 2712, 2718, 2722, 2724, 2730, 2732, 3270, 3317, 3317, 4205, 4206, 4210, 4212, 4220, 4228, 4325C, 4500, 4552, 4562, 4572, 4600, 4613, 4620, 4814, 4817, 4818, 4820, 4822, 4824, 4826, 4828, 4830, 4832, 5040, 5050, 5705, 5710, 5800, 5802, 5805, 5806, 5808, 5810, 5812, 5814, 5816, 5817, 5818, 5820, 5825, 5830, 5838, 5910, 5932, 6200, 6210, 6211, 6212, 6214, 6215, 6217, 6218, 6230, 6233, 6234, 6235, 6408, 6412, 6416, 6423, 6606, 6620, 6630, 7000, 7004, 7005, 7025, 7028, 7033, 7035, 7043, 7200, 7211, 7212, 8220, 8280, 9000, 9005, 9008, 9010, 9015, 9018, 9044, 9100, 9134, 9136, 9200, 9323, 9334, 9400, 9410, 9420, 9836, 9900 Series, 57815, 57817, 57820, 57825, 93220, CG500, CG550, CM17, DL17, DX14, FM17, FM22, HD102, HD105, HD110 & SM14, 484.1744180 and others. ADD BASIC S&H
|
Spool Holder / Lead off Small #507664-454/467 $2.95 (176650)(179967-464)(179967-463) For extra small spools of thread. Fits: Inspiration 4200 series, 4600, 4830/4832, 5500, 5800, 5825, 5830, 5838, 6200, 7200, 9000, 9100, 9200, 9400, 9900 series, 6620, 57817, 57820, 57825, 7025, 8220, CM17, DL-17, FX-17, FX-22, SM14 and others. ADD BASIC S&H
|
|
Spool Holder / Lead off Medium #312816-451 (507664-467) $3.95 For medium thread spools. Fits: 4600, 4830/4832, 5500, 5800, 6200, 7200, 9000, 9100, 9200, 9400, 9900 series, 6620, 57817, 57820, 7025, 8220, DL-17, FX-17, FX-22, SM-14 and others. ADD BASIC S&H
|
Spool Holder / Lead off Quantum #385376S (385017)$7.95 Double end for medium and large thread spools. Fits Singer Quantum LE XL100, XL1000, Futura 4000(N), DSX2. Compatable with spool pin #385116. ADD BASIC S&H
|
Spool Holder / Lead off #283024$7.95 Meduim to small thread holder. Fits XL-1, CXL Compatable with spool pin #385116. ADD BASIC S&H
|
Horizontal Spool Pin #174391-656$3.95 Push-in or glue-in (plastic) Fits: 560, 600, 603, 604, 620, 625, 626, 628, 629, 630, 635, 636, 638, 639, 640, 645, 646, 648, 649, 737, 750, 755, 756, 758, 770, 775, 778, 860, 1060 ADD BASIC S&H
|
Horizontal Spool Pin #507139-455 (312940-451)$5.95 Plastic Push-in, Glue-in or some are held in be a set screw on the under side of the top lid. Please Note: This plastic spool pin replaces earlier models using the metal spool pin (#312940-451) Fits: Singer 834, 1100, 4325, 4500 series, 4610, 4613, 4617, 4620, 4622, 4623, 4830, 4832, 5017, 5028, 5040, 5050, 5710, 5800 series, 5812, 5814, 5816, 5818, 5825, 5830, 5838, 5910, 5932, 6233, 6234, 6235, 6244, 6267, 6268, 6408, 6412, 6416, 6423, 7000, 7004, 7005, 7028, 7033, 7037, 7043, 7050, 7060, 7211, 7212, 8220, 8600 series, 9005, 9008, 9010, 9015, 9018, 9020, 9027, 9030, 9032, 9034, 9044, 9113, 9117, 9124, 9130, 9133, 9137, 9143, 9374, 9410, 9416, 9420, 9430, 9432, 9444, 9800, 9900, FM17, FM22, 30920, 57820, 57825, 93234 Brother VX1005. Uses spool holder 511113-456 ADD BASIC S&H
|
Horizontal Spool Pin #542412-451$3.95 Screw-in (plastic) Fits: 1425 ADD BASIC S&H
|
Spool Pin with Holder #408097-454 (408097-451)$28.95 Fits: 1411, 1425, 5522, 5525, 5528, 5530, 935. ADD BASIC S&H
|
Spool Pin with Holder #382485-451 (408097-454)$19.95 Comes with spool cushion as viewed Fits: 900, 920, 1030, 1036, 1200, 2000, 2001, 2005, 2010. ADD BASIC S&H
|
Singer Twin Needle Spool Pin #444813-454 (313026)$3.95 For twin needle sewing holds second spool of thread. Fits on top cover. Fits most Singer model sewing machines: Singer self winding bobbin machines 500/800 Stylist, 600, 700, 2000, Inspiration 4200 series, 4600, 6200, 9000 series, 9100 series, 9400 series, Brother VX1005. ADD BASIC S&H
|
Singer Twin Needle Spool Pin (B/W) #642225 (422250-451)$3.95 Fits on all Singer top mounted bobbin winder machines (all models) ADD BASIC S&H
|
Singer Twin Needle Spool Pin (Quantum) #283679$3.95 Fits: Singer Quantum, CXL, LE, XL-1, XL-100 ADD BASIC S&H
|
Singer Twin Needle Spool Pin (900-2000) #381114-451$4.95 Slides on horizontal spool pin body. Fits: Singer 900, 920, 1030, 1036, 1200, 2000, 2001, 2005, 2010. ADD BASIC S&H
|
Singer Twin Needle Spool Pin (500 Slant-O-Matic) #130920-051$3.95 Not original, fits Singer 600, 700 Touch and Sew, also fits Brother machines. ADD BASIC S&H
|
Spool Pin 2-Way #286566451$5.95 2-way spool pin. Pivots horizontally or vertically. Fits Singer models 9210, 9217, 9224, 9240 and others. ADD BASIC S&H
|
Horizontal Spool Pin #E1A1663210 (Sold Complete)$4.95 Sold complete includes part numbers: E1A1423000, 004230036, E1A1433003 molded together as one unit. Horizontal spool pin for Singer models 3709, 3722, 3810, 3815, 3820, 3825, 6510, 6550, 7312, 7322, 7350, 7360, 7380 ADD BASIC S&H
|
Horizontal Spool Pin #137161$4.95 Horizontal spool pin for Singer models 6408, 6412, 6416, 6423 and others. ADD BASIC S&H
|
Horizontal Spool Pin #385116$4.95 Horizontal spool pin for Singer Quantum LE, XL-100, XL1000 ADD BASIC S&H
|
Horizontal Spool Pin Assembly #283012$9.95 Horizontal spool pin assembly for Singer Quantum CXL, XL1. ADD BASIC S&H
|
Singer Spool Pin with Stand #423090-451****NLA****$0.00 ****NO LONGER AVAILABLE***** Spool pin ONLY is available order #507139-455 Fits Singer models: 2102, 2105, 2106, 2108, 2112, 1482, 1485, 1486, 1490, 1492 Sears by Singer 484.12441, 484.1244180, 484.15441, 484.1544180, 484.17441, 484.1744180 ADD BASIC S&H
|
Double Metal Spool Pin with Bracket #YA-65 (YA-40) $12.95 (6890)(6004)(YA117-2) Fits many brands and models requiring double spool pins. For: New Home, Brother, Kenmore, White, Simplicity, Tacony, Babylock, Neechi and many others. Single hole mount, can be substituted for machines requiring two hole mount. ADD BASIC S&H
|
Singer Auxiliary Spool Pin #064083$3.95 (317769)(317692N/L/A) Fits new style "Featherweight" model 132FW, 132Q, 140Q, 322, 324FW, 7400 series, 7422, 7424, 7426, 7436, 7442, 7444, 7446, 7462, 7464, 7466, 7468, 7469 NEW style with slit in bottom end Total new length 2 3/8" long, replaces 3 1/2" length ADD BASIC S&H
|
Singer Spool Pin Stand 322/324 #317770****NLA****$0.00 ****NO LONGER AVAILABLE***** Spool stand (back mount) Fits new style "Featherweight" model 322, 324 Caompatable with spool pin #064083 ADD BASIC S&H
|
Singer Spool Pin #986008****No Longer Available****$0.00 ****No Longer Available**** Fits: Singer 2623 approx. 3 3/4" total length This spool pin can also use spool cap #317768 large, 74765 medium and #079770 small ADD BASIC S&H
|
Singer / Kenmore / White Large Spool Cap #317768****No Longer Available****$0.00 ****No Longer Available**** (use replacement spool pin cap Singer / Kenmore / White Spool Cap (Large) #986013-032 listed above (95123)(65653KM)(986013032) Large spool cap, 47mm outside diameter. Fits: Singer 322FW, 324FW, 2623 Fits spool pin 064083, 986008, 168070 ADD BASIC S&H
|
Singer / Kenmore Medium Spool Cap #074765 $6.95 (44979)(55503)(65653) (95123) cap measures approx. 1 11/16" (44mm) Fits: Singer 132Q, 2638, 2639 & 2662 and others For Kenmore models this cap fits spool pin #44999, 50311 and others. It can be used as a replacement for some caps that are no longer available. This cap is slightly smaller than the original. Fits Kenmore: 158.16800, 158.17812, 158.1784080, 158.1784182, 158.17850, 158.1787180, 158.1789180, 158.1789280, 158.1792080, 158.1792182, 158.1792183, 158.1792280 and many others Please consult your manual Fits spool pin 064083, 986008, 168070, 44999, 49951, 49873B, 50311 and others. ADD BASIC S&H
|
Singer / Kenmore Small Spool Cap #079070 $3.95 (75357)(65252KM)(986014033) 32mm outside diameter Spool cap for Singer 117 Featherweight, 117 Plume, 1500, 2638, 2639, 2662, 4166, 14J334, CE-100, CE-150, CE-200, CE-250, CE-350, SES1000 & SES2000, Izek, Singer serger 14U34. Fits spool pin 064083, 986008, 168070 ADD BASIC S&H
|
Singer / Babylock / EuroPro Spool Pin #168070 (168070046)$3.95 Fits Singer: 117, 4166 Babylock: BL66, BL67 EuroPro: 9015 ADD BASIC S&H |
Singer / White Spool Cap (Large) #986013-032$3.95 (986013046)(317768)(95123) Large spool cap for spool pin #168070 Also see small cap #079070 Fits: Singer 117 Featherweight, 117 Plume, 2632, 4166 Babylock: BL100A Amelia, BL66 Xscape, BL67 Audrey Euro Pro, Shark: 9015 Simplicity: SA1600, SA2400L, SW240 American Quilter White: 1740, 2037 ADD BASIC S&H |
Singer Spool Pin Complete #357704-900 (356942-453)$4.95 Spool system complete Fits: 2732, 5417, 5430, 6038. Takes large spool cap #511113-456 and small spool cap #312816-451. ADD BASIC S&H
|
Singer 500 Hinged Spool Pin #172509$3.95 Hinged nylon spool pin for 500/503 Slant-O-Matic Use spring #172512 ADD BASIC S&H
|
Singer 500 Spring for Hinged Spool Pin #068332 (172512)$3.95 Substitute,original no longer available Spring for hinged nylon spool pin #172509 for 500/503 Slant-O-Matic ADD BASIC S&H
|
Singer Spool Pin #316360-451****NLA****$0.00 ****No Longer Available**** Singer retractable plastic spool pin. Fits: 30215, 30518, 342, 345 ADD BASIC S&H
|
Singer Main Spool Pin #087296$4.95 Fits: 7422, 7424, 7426, 7436CL, 7442, 7444, 7446, 7462, 7464, 7468 and others requiring this type spool pin. Order spool thread retainers (cap) #087287 mini, #087289 small/medium, #087290 large ADD BASIC S&H
|
Singer Spool Pin Cap (mini) #087287 (5)$2.95 Fits: 7422, 7424, 7426, 7436CL, 7442, 7444, 7446, 7462, 7464, 7468 and others requiring this type spool pin cap. Compatiable with spool pin #087296 ADD BASIC S&H
|
Singer Spool Pin Cap (small/medium) #087289 (6)$3.95 Fits: 7422, 7424, 7426, 7436CL, 7442, 7444, 7446, 7462, 7464, 7468 and others requiring this type spool pin cap. Compatiable with spool pin #087296 ADD BASIC S&H
|
Singer Spool Pin Cap (large) #087290 (7)$3.95 Fits: 7422, 7424, 7426, 7436CL, 7442, 7444, 7446, 7462, 7464, 7468 and others requiring this type spool pin cap. Compatiable with spool pin #087296 ADD BASIC S&H
|
Singer Spool Pin #HP32737 (68002912)$4.95 Approx. 4" in length Fits: 9910, 9920, 9940, 9960, 9970 Use spool cap #HP30074 ADD BASIC S&H
|
Singer Large Thread Spool Cap #HP30074 (#8)$3.95 41mm wide diameter Fits: 9910, 9920, 9940 and others Fits spool pin #HP32737 ADD BASIC S&H
|
Singer Small Thread Spool Cap #HP33109$2.95 Fits: 9910, 9920, 9940 and others Fits spool pin #HP32737 ADD BASIC S&H
|
Singer Large Felt Washer #HP31007 (28)(13) $2.95 40mm wide diameter Fits: 9910, 9920, 9940 and others ADD BASIC S&H
|
Singer Spool Pin (base) #V610443210$4.95 Fits models: 1105, 1116, 1120, 1130, 1507, 1525, 1725, 8275, 8280 Use large/medium spool holder #R12373210B and small spool holder R12373210 ADD BASIC S&H
|
Singer Large/Medium Spool Holder #R12373210B $5.95 (I)(#20)(TA10943209) Large/medium spool holder Fits models: 1105, 1116, 1120, 1130, 1507, 1525, 1725, 2250, 2259, 2263, 3820, 8275 and others. For spool pin #V610443210 ADD BASIC S&H
|
Singer Small Spool Holder #416157601 $2.95 (R123732210)(I)(#7)(TA10943210) Small spool holder Fits Singer models: 1105, 1116, 1120, 1130, 1507, 1525, 1725, 2250, 2259, 2263, 3321, 3323, 3820, 8275 Pfaff: 1005, 200C For spool pin #V610443210 ADD BASIC S&H
|
Singer Vertical Spool Pin #086913 "B" $4.95 Singer vertical spool pin "B", holds large cone type spools of thread Please note: the BASE #86912 is NO LONGER AVAILABLE Fits: CE-100, CE-150 Futura III, CE-200, CE-250 Futura III, CE-350 Futura III, SES1000 Futura III, SES2000 Futura III ADD BASIC S&H
|
Singer Metal Thread Guide Pole #083130 (086915)****NLA****$0.00 ****No Longer Available**** Thread guide pole used when sewing with the large cone type spool of thread. Fits: Futura CE100, CE200 ADD BASIC S&H
|
Singer Horizonal Spool Pin #086123$3.95 Horizonal spool pin for normal sewing / threading. Fits: Futura CE100, CE200 Use spool cap type #085124 (96123) ADD BASIC S&H
|
|
Singer Spool Cap #085124 (96123) $2.95 Spool cap for horizonal spool pin #086123. ADD BASIC S&H
|
Singer Spool Pin Complete (pin & base) #4164926-01$12.95 (4164645-01)(4162860-01) Spool pin with base sold complete Fits: Brilliance, Fashion Mate (made in 2012), 5400, 5500NS, 6160, 6180, 6199 ADD BASIC S&H |
Singer Spool Pin (gray) #416469701$3.95 Fits Singer: 44S, 4411, 4423 Heavy Duty ADD BASIC S&H |
Singer Spool Pin (white) #416169401$3.95 Fits Singer: Professional 2010, ET-1, H74, H10A, H20A, H30A, H40A, H50A ADD BASIC S&H |
Singer Spool Pin (Twin Needle / Auxiliary) #HP30209$4.95 (68001820) Twin needle / auxiliary spool pin Fits Singer Quantum series, 9910, 9920, 9940, 9960 Add BASIC S&H |
Singer / Brother Spool Pin #XF4744001$14.95 Fits Singer: 5500 (new version) Brother: CE1100PRW, DZ2400, DZ2750, DZ3000, DZ3400, DZ820E, FS100WT, FS130QC, HC1850, HS9500, SQ9185, XR1300, XR1355 ADD BASIC S&H |
Replacement Spool Pin $12.95 Replacement spool pin for situations where the original spool pin is no longer functional The spool pin has a nut that attaches the spool pin to the top of the machine It also bends over for storage See replacement spool pin on the right side ADD BASIC S&H |
Singer Spool Cap 14U Series #546894 $3.95 Spool cap for Singer 14U series sergers. Allowes the use of thread (regular spools) other than cone thread. ADD BASIC S&H
|
Singer Cone Holder 14U #546893$3.95 Cone holder for Singer 14U series serger. Slides onto the vertical spool pin to help stabilize cone thread. ADD BASIC S&H
|
Singer Serger/Overlock Thread Guide Holder #412519$24.95 (550346)(412761) Thread guide holder for 3 or 4 thread sergers. Comes with attachment screw, telescopic rod and upper thread guide bar. Fits Singer: 14U34B, 14U234, 14U234B, 14CG744, 14CG754, 14SH644, 14SH654, 14SH744, 14SH754 and 14U544 Elna: L5D ADD BASIC S&H
|
4 Inch Embroidery Scissors$12.95 4" embroidery scissors Fine sharp point ideal for close work in small areas CAUTION: As in most cutting instruments the point and blades are sharp and should be handled ONLY by adults for cutting and craft use. packaging and brand may vary ADD BASIC S&H
|
Tweezers #TWE6$3.95 Top quality tweezers with guide pin 6" long with bent point design. The best tool in your accessory box. Ideal for threading needles on sewing machines and needles and loopers on sergers. Many other practical sewing uses: removing thread and lint build-up from small areas in the sewing machine, pulling out unwanted stitches, etc. ADD BASIC S&H
|
Operator Maintenance Kit$12.95 *High quality oil in refillable extendable spout. Long neck spout style of oiler #NK2 may vary depending on availability. *Lubricant for gears *Lint brush *Extra fine quality screw driver for tension adjustments *2 strips of crocus cloth for removing burs on hook, etc. *6" abrasive cord #52 for removing burs in and around needle plate, etc. *Oil and lubricant instructions pamphlet for various models ADD BASIC S&H
|
Free Motion Guide Grip $39.95 Fits ALL machines. No need to place your fabric in a hoop for free-motion sewing. Place on top of fabric for free-motion, quilting, embroidery or monogramming. The friction surface on the underside of the guide grip holds the fabric taut and provides handles for moving the fabric. Set your machine for normal free-motion sewing according to your operators manual. Note: For free-arm models works best with your sewing machine extension plate attached. Some fabrics especially light weight fabrics may require a stabilizer. Some projects may require the conventional two piece wood hoop. NOTE: For additional information click on this link "How to do Free Motion Sewing" This item is Freight Intensive (F/I), $8.95 is the basic S&H for ALL Freight Intensive (F/I) items
|
Mini Precision Screwdriver Set (Bin T-4)$12.95 Small compact set includes convenient bit holder Set includes 18 different bit ends: Slotted: 1/8", 3/32", 5/64", 5/64", 1/16" Phillips: PH000, PH00, PH00, PH0, PH1 Torx star: T4, T5, T6, T7, T8, T9, T10, T15 Depending on current inventory this item may very in color and / or brand ADD BASIC S&H |
Small Tools, Driver Set with Offset Ratchet (Bin-T-1)$24.95 Sewing machine and other small appliances require different tools than your car or home This set is a great place to start Set contains one each: reversible ratchet handle, spinner screwdriver handle, 3 1/4" extension handle One each of the following bits Slotted screwdriver: 1/8", 1/4" Phillips screwdriver: PH#1, PH#2 Hex: .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", Torx: T6, T8, T10, T15, T20, T25 ADD BASIC S&H |
Torx Bit Set 5" Long with Thin Shaft (Bin T-2)****No Longer Available****$0.00 ****No Longer Available**** Sewing machine and other appliances require a long thin shaft for getting into confined areas 5" long with a standard 1/4" hex shaft Set includes one each: T6, T7, T8, T9, T10, T15, T25, T30, T40 ADD BASIC S&H |
Torx Bit Set Small (Bin T-3)$13.95 Hard to find Torx bits, standard 1/4" hex shaft Set includes: T4, T5, T6, T7, T8, T9, T10, T15, T20, T25 ADD BASIC S&H |
Email: sewingmachine221sale@pop.bizland.com
This web site is owned and operated by:
Discount Sewing Machine Service ©2000
Site contains material that are trademark TM and servicemark SM.
All material is for personal use only and is not to be mass produced.
Pages constructed and maintained by Kas