Home
 
Kenmore, New Home,
Janome Needle & Slide Plates

 
Kenmore Feet
 
Kenmore Foot Controls
 
Kenmore Bobbins &
Bobbin Cases

 
Light Bulbs & Sockets
 
Type "A" Pressure Feet
 
Anatomy of a Needle
 
Kenmore Belts
 
Kenmore Super High (slant) Feet
 
Serger (overlock) Parts
google5993c5666b5daeec.html

KENMORE / NEW HOME / JANOME PARTS
and Other Popular Machines Using the Kenmore Parts


The following most common parts are listed on this page:
Bobbin Winders
Spool Pins & Caps
Thread Guides
Levers
Needle Clamps & Needle Clamp Screws
Feed Dogs
Presser Knob & Spring
Tensions
Light Bulbs
Cam Gears
Motors
Mounting Kits


HOW DO I DETERMINE MY KENMORE MODEL NUMBER ???
There is a motor number on the motor which is a four diget number,
THIS IS NOT THE SEWING MACHINES MODEL NUMBER.
The model number will start with 117.-----, 148.-----, 158.-----, 385--------.

NOTE: On multiple parts order pay freight for only one item. ADD BASIC S&H of $3.95
Parts order over $45.00 FREE freight. Excluding Freight Intensive (F/I) Items.

   
KBW1368.jpg Kenmore Bobbin Winder #1368 (35980)(*34602)
$18.95
Fits models: 158.12270, 158.13010, 158.13150,158.13160, 158.13170, 158.13180, 158.13190, 158.13200, 158.13201, 158.13250, 158.13520, 158.13810, 158.14000, 158.14001, 158.14002, 158.14003, 158.14100, 158.14101, 158.14300, 158.14301, 158.15040, 158.16012, 158.16013, 158.16020, 158.16021, 158.16030, 158.16031, 158.16210, 158.17011, 158.17012, 158.17030, 158.17530, 158.17550, 158.17560, 158.17570, 158.17571, 158.17572, 158.18022, 158.18023, 158.18024, 158.18031, 158.18032
*SPECIAL NOTE (SUBSTITUTE)
For models with the "Bobbin Winder Reset Button" such as 158.16030, 158.17031, 158.18032 and others with this system requiring bobbin winder part #34602 (KM33156). This part is NO LONGER AVAILABLE - The additional lever on the push button winder is NOT interchangeable with #1368. The #1368 will work as a substitute, however the (bobbin winder reset button) will be in the down position meaning the machine will run while filling the bobbin.
Comes with bobbin winder ring.
ADD BASIC S&H
 

   
KBW52812B.jpg Kenmore Bobbin Winder #52812-B (200540)
$19.95
Fits models: 148.12210, 148.13022, 148.13023, 148.11170, 148.12030, 148.12170, 148.12181, 148.12200 series.
Comes with bobbin winder ring.
ADD BASIC S&H
 

   
KBW58186B.jpg Kenmore Bobbin Winder #58186-B
$23.95
58186-B
Fits models: 158.1784182, 158.1784183
Comes with bobbin winder ring.
ADD BASIC S&H
 

   
KBW735501005.jpg Kenmore Bobbin Winder #735501005 (736501008)
$16.95
(395711-79)(740602209)
Fits Kenmore: 385.1168280, 385.12102, 385.12014590, 385.12712090, 385.12714090, 385.12116690, 385.1278191, 385.12916890, 385.12318990 and others
Babylock: BL16, BL18A (Natalie), BL22, BL23
Elna: 1000 (Sew Fun), 2002, 2004, 2006, 2100, 2300
Janome/New Home: 1004, 1506, 1508, 1518, 1612, 1622, 1814, 1818, 1822
Comes with bobbin winder ring.
ADD BASIC S&H
 

   
KBW52831B.jpg Kenmore Bobbin Winder #52831B (214458)
$21.95
Fits models: 148.13100, 148.13110, 148.13220, 148.14220, 148.15600
Comes with bobbin winder ring.
ADD BASIC S&H
 

   
Kenmore Bobbin Winder #64182
$0.00
This bobbin winder is NO LONGER AVAILABLE
Fits models: 158.1010180, 158.1110180, 158.1262180, 158.1440180, 158.1450180, 158.1457180, 158.60200, 158.60400, 158.60600, 158.60700, 158.60900, 158.60910, 158.60980/1

 

   
KBobbinWinder652506000.jpg Kenmore Bobbin Winder #652506000
$19.95
(395762-06)
Fits Kenmore Models: 385.162213, 385.19601, 385.16524, 385.17526, 385.17626, 385.17628, 385.17641, 385.17724, 385.17781, 385.17822, 385.17826, 385.17822490, 385.17828, 385.17922, 385.17928, 385.18330, 385.18630, 385.18830, 385.18836, 385.18841 & 385.19601
Babylock Models: BL30A
Elna Models: 2600
Janome (New Home) Models: 659 and Sew Precise
ADD BASIC S&H
 

   
bw15287.gif Bobbin Winder Ring #15287-A (large)
$2.95
(322)(8123)(1939)(JO1519)(61662)(F20213000)
Large bobbin winder ring
Bobbin winder pulley
Fits bobbin winder #V61165000
ADD BASIC S&H
 

   
Kenmore Bobbin Winder Hub #15288
$0.00
NO LONGER AVAILABLE
Bobbin winder hub, fits most models
ADD BASIC S&H
 

   
Spool Pin Felt #8879 (77040)
$1.95
Felt pad for thread to sit on.
ADD BASIC S&H
 

   
MetalSpoolPinYA2F.jpg Metal Spool Pin # 0138BR (YA-2F) (8286)(61663)(41006)(231008)
$3.95
Metal screw-in type, fits most machines.
Please note: Kenmore spool pin with spring #41006 is no longer available use YA-2F as substitute.
ADD BASIC S&H
 

   
KPlasticSpoolPin49873B.jpg Kenmore Plastic Spool Pin #49873B
$15.95
Use spool cap 74765.
Fits model 1581784080, 158.1784182
ADD BASIC S&H
 

   
ksp724206106.gif Kenmore Spool Pin #724206106
$3.95
Horizontal spool pin, tilts up for easy thread replacement.
Fits many models including: 385.1652400, 385.1652800, 385.17526590, 385.17624, 385.1584180, 385.17724490, 385.1764180, 385.17324990 compatible with spool holder large #82202053 and small #822019509.
ADD BASIC S&H
 

   
DoublespoolpinYA40.gif Double Metal Spool Pin with Bracket #YA-65 (YA-40)
$6.95
(6890)(6004)(YA117-2)
Fits many brands and models requiring double spool pins.
For: New Home, Brother, Kenmore, White, Simplicity, Tacony, Babylock, Neechi and many others.
Single hole mount, can be substituted for machines requiring two hole mount.
ADD BASIC S&H
 

   
KRetractableSpoolPinKit.jpg Kenmore Retractable Spool Pin Kit #652205006
$16.95
(188058001-B)(395710-33)(395710-32)(413286-20-E)(5844-W)(652302004)(652017009)(652019001)(652205109)
All metal retractable spool pin kit sold complete ONLY.
Includes spool pin, bushing and metal retaining spring clip.
Fits Kenmore: 385.11607, 385.11608, 385.11682, 385.12014, 358.12049, 385.12102, 385.12216, 385.12314, 385.12318, 385.12514, 385.12545, 385.12581, 385.12612, 385.12618, 385.12712, 385.12714, 385.12912, 385.15201, 385.15202, 385.15212400, 385.15212490, 385.152184, 385.1764180, 385.17724490, 385.17824090, 385.1884180, 385.1960180,
Babylock: BL18, BL18A (Natalie), BL1170
Janome (Newhome): 1004, 1506, 1508, 1518, 1612, 1622, 1814, 1818, 1822
Simplicity: SL1170
White: 988, 999, 1099, 1202
There has been a transition in this type of spool pin system. Some of the original parts are no longer available. You may or may not need all of these parts.
ADD BASIC S&H
 

   
Kenmore Small Spool Holder #822019303
$2.95
Small spool holder for small or narrow spools.
Also for spools without ends.
Compatible with spool pin #724206106
ADD BASIC S&H
 

   
ssc079070.gif Singer / Kenmore Small Spool Cap #079070
$3.95
(75357)(65252KM)(986014033)
32mm outside diameter
Spool cap for 1500, 2638, 2639, 2662, 14J334, CE-100, CE-150, CE-200, CE-250, CE-350, SES1000 & SES2000, Izek, Singer serger 14U34.
Fits spool pin #064083 and #986008
ADD BASIC S&H
 

   
ssc74765.gif Singer / Kenmore Medium Spool Cap #74765
$6.95
(44979)(55503)(65653) (95123) cap measures approx. 1 11/16" (44mm)
Fits: Singer 132Q, 2638, 2639 & 2662 and others
For Kenmore models this cap fits spool pin #44999, 50311 and others.
It can be used as a replacement for some caps that are no longer available. This cap is slightly smaller than the original.
Fits Kenmore: 158.16800, 158.17812, 158.1784080, 158.1784182, 158.17850, 158.1787180, 158.1789180, 158.1789280, 158.1792080, 158.1792182, 158.1792183, 158.1792280 and many others
Please consult your manual
Fits spool pin 064083, 986008, 44999, 49951, 49873B, 50311 and others.
ADD BASIC S&H
 

   
Kenmore Large Spool Holder #822020503
$2.95
Large spool holder designed to hold spool in place and to override the rough end of the spool. Try to choose a holder larger in diameter than the spool of thread.
Compatible with spool pin #724206106.
Also works on most sergers.
ADD BASIC S&H
 

   
KThreadGuide16830.jpg Kenmore Thread Guide #16830****NLA****
$0.00
****No Longer Available****
ADD BASIC S&H
 

   
KthreadGuide52802B.jpg Kenmore Thread Guide #52802B
$7.95
ADD BASIC S&H
 

   
KReverseLever34521.jpg Kenmore Reverse Lever #34521 (#36530 NLA)
$11.95
Fits models: 158.14000, 158.14100, 15814101
#36530 (wide lever) no longer available, use #34521 for models 158.17031, 158.17033, 158.17740, 158.18024, 158.18030 and others.
ADD BASIC S&H
 

   
Kenmore Reverse Lever #52874
$0.00
NO LONGER AVAILABLE
Fits models: 148.14220, 158.13100
ADD BASIC S&H
 

   
KCollar52835B.jpg Kenmore Mounting Plate Stitch Length Collar #52835B (214267)
$24.95
New improved heavy-duty nylon mounting plate (collar) for stitch length dial such as #214471. Fits models #148.15600, 148.19370 and others requiring this collar.
ADD BASIC S&H
 

   
NeedleClamp2054.jpg Kenmore Needle Clamp #2054
$6.95
Kenmore side loading
ADD BASIC S&H
 

   
Kneedleclamp43268.jpg Kenmore Needle Clamp #KM43268
$24.95
Fits most 158 series with small set screw in front to hold needle.
Comes complete ONLY with set screw.
ADD BASIC S&H
 

   
KNeedleClampSNZ1.jpg Needle Clamp Complete #SNZ1
$12.95
(KM36353 N/L/A)(26929 N/L/A)
Needle clamp complete with screw and built-on thread guide (as viewed from bottom side)
Most common for zig-zag front bobbin loading machines
Fits many models: Kenmore, Babylock, Necchi, Riccar, White, Brother, New Home and many others.
Note: For Kenmore machines and some other brands requiring needle clamp #36365, #26929 which are no longer available; remove the twin eye spring (thread guide) only from the needle bar which is secured by a small screw no the back side of the needle bar. Re-fix the screw back in the same hole. This will allow you to use #SNZ1 which has it's own thread guide.
ADD BASIC S&H
 

   
SingerNeedleClampScrew131226001.jpg Needle Clamp Screw #131226001/051 (Bin-NC-016)
$3.95
(178871)(113413-451)
Compatible with needle clamp #155459NS, #353631OS, #129853001, SNZ1
NOTE: Will NOT fit Brother VX1005 old style needle clamp
ADD BASIC S&H
 

   
threadcutter26075.gif Thread Cutter #26075 (KM2470)
$12.95
No longer available as new, must be removed from a machine in our inventory.
Thread cutter clips on the presser bar shaft.
Fits most Singer's and other models.
ADD BASIC S&H
 

   
seamguide55415.jpg Adjustable Seam Guide #55415
$3.95
For extra help in keeping seams straight, particularly beneficial for quilters and other sewing functions requiring accurate stitch placement. For sewing machines having a screw hole in the bed of the machine on the right side of the needle plate.
Leading edge of guide is 5/8" wide and the adjusting is 1 5/8" long.
ADD BASIC S&H
 

   
KFeedDog735081004.jpg Kenmore Feed Dog #735081004
$12.95
Fits Kenmore: 385.12712090 and other similar 385 series
Babylock: BL18, BL18A (Natalie), BL1170 & BL1108
Elna: 1000 (Sew Fun), 2002, 2004, 2006, 2100 & 2300
Janome(New Home): 1004, 1506, 1508, 1518, 1612, 1622, 1814, 1818, 1822 & JA1500
Simplicity: SL1170
ADD BASIC S&H
 

   
KFeedDog321065007.jpg Feed Dogs #321065007
$12.95
(640026004)
Fits Babylock: BL1050 & BL2800
Necchi: 514, 521, 524FA, 525FA, 5102
New Home: 222, 630H, 640, 844
Simplicity: SL1200, SL1250, SL1325, SL6950, & SL6220
Riccar: R200, R250, R1500, R1570, R1570FB, R1800, R1850, 7610, 7620
Tacony: FA693
White: 1407, 1411 & 1415
ADD BASIC S&H
 

   
KFeedDog650083000.jpg Kenmore Feed Dog #650083000
$29.95
Fits Kenmore: 385.17724490, 385.1788180 and other similar 385 series
Janome(New home): 2014 & 2015
ADD BASIC S&H
 

   
SKFeedDog447581.jpg Singer / Kenmore Feed Dog #447581
$14.95
Metal feed dog fits Singer models: 1482, 1485, 1486, 1488, 1490, 1492, 2102, 2105, 2106, 2108, 2110, 2112, 2114, 2118, 2210
Sears Kenmore by Singer 122441, 15441, 17441, 8518, 8602, 8605, 8606, 8610, 8614, 8618, 9518, 9620, 9605, 9608, 9610, 9612, 9614, 9618
ADD BASIC S&H
 

   
KPresserKnob56422_2.jpg Kenmore Presser Knob #56422 (32111)
$11.95
Fits many Kenmore models, 148 series, 158 series and 385 series
Fits Kenmore: 385.1233180
ADD BASIC S&H


   
KSpring647144000_2.jpg Kenmore Presser Spring #647144000
$6.95
Fits most Kenmore 148 series, 158 series and 385 series.
For machines using presser knob #56422 (32111)
ADD BASIC S&H


   
kmten34408.gif Tension Complete #34408 (9151)
$26.95
Spring pulls down see arrow.
Fits older 148 series.
Special Note: Depending on your model you may need to remove paint residue on the surface of the fixing hole for a better fit. You also may need to cut the tension release pin to fit the tension release lever on your machine.
ADD BASIC S&H
 

   
kmtendp60683.gif Tension Complete #DP60683
$26.95
(3087)(39543)(46105)(55480-B)(MO2052)(647506004)(200398)(202017)(201401)(4830)(34408)(34532)
Spring pulls up, see arrow
Fits 158 series
Special Note: Depending on your model you may need to remove paint residue on the surface of the fixing hole for a better fit. You also may need to cut the tension release pin to fit the tension release lever on your machine.
ADD BASIC S&H
 

   
LightBulb676-2.jpg Light Bulb #676 (676F)
$2.95
(194120)(777910-002)(4PCW-PD)(6797)(3815)(72936)(4620)(000009803)(549887-003)(194120-019)(358207-120)(930144480)(60,062)
Bayonet type (push-turn), 120 volt, 15 watt
Smaller glass for easy replacement
Most common for Singer, Kenmore & many other brands.
To help identify the correct bulb remove your old bulb first to compare.
Before you replace the bulb on any sewing machine you MUST un-plug your electrical cord from the wall outlet.
ADD BASIC S&H
 

   
NewHomepinlightbulbMC800HL1.gif New Home / Elna / Kenmore Pin Type Light Bulb #MC8000HL1
$18.95
(395722-99)(000009917)(000009906)
Small 2 pin bulb, 12 volt 3 watt
Fits many New Home models: 3000, 3005, 3007, 4000, 4800QC, 5124, 5700, 6003, 6004, 8000, 9000, 10000, 10001
Elna: 3005, 3007, 6003, 6004, 8006, 9006, 9010E, CE20
Kenmore: 385.19000, 385.09001, 385.19010, 385.19030, 385.19150090, 385.19153, 385.19153690, 385. 19157, 385.19157100, 385.19365, 385.19365991, 385.19365,
ADD BASIC S&H
 

   
Gear39453P_2.jpg Cam Gear 39453 (200703)
$17.95
Most common Kenmore zig-zag cam gear.
12/32" (9.5mm) shaft, vertical zig-zag cam.
Fits Kenmore models: 158.12270, 158.12271, 158.12272, 158.12370, 158.12470, 158.12471, 158.12472, 158.12270, 158.12271, 158.12272, 158.12370
When replacing this gear you will need to use you existing shaft and bushing.
Please note the rotation of the gear and match this rotation to your present gear.
Some models will use vertical gear #3692-169S.
ADD BASIC S&H
 

   
Gear3692169S_2.jpg Vertical Zig-Zag Cam Gear #3692-169S
$23.95
Most common Brother zig-zag cam gear.
12/32" (9.5mm) shaft with bushing.
Please note you can use your shaft and bushing from your existing zig-zag cam gear if this is no the correct size for your model.
Please note the rotation of the gear and match this rotation to your present gear.
Fits Brother: 1681, 360, 451, 661, 681, 741, 751, XL851, XL1351, XL1561, XL1781, XL781, XL791
Also fits some Kenmore: gear #202130 (JA36GJ)
Kenmore models: 148.122181, 148.12190, 148.12200, 148.12210
ADD BASIC S&H


   
RotaryPulley409.jpg Friction Motor Wheel Pulley 409
$4.95
409
Fits model 117.95
ADD BASIC S&H
 

   
kmotor.gif Motor & Bracket #39963 (Replacement Motor)
$59.95
(1290)(2139)(2145)(5150)(5152)(5163)(5168)(5187)(5195)(34600)(YM-40)(50004)(50005)(32823)
Motor is 0.9A, 7000RPM, AC 110/125V, 90 watt, 50/60Hz
Fits models: 148 and 158 series where the motor is mounted internally or on the under side of the machine.
Comes with bracket.
For some machines it may be necessary to use your own bracket and in some rare cases may be necessary to drill new hole in your existing bracket.
Compatible with "motor maintence kit #4013/4015"
This item is Freight Intensive (F/I), $8.95 is the basic S&H for ALL Freight Intensive (F/I) items
 

   
km50001.gif Kenmore Motor #50001ns (Replacement Motor)
$59.95
(DP50012)(1120)(202085)(2142)(5120)(5122) (5150R)(5151)(5154)(5156)(SR-5159)(5162)(5167)(5169)(5186)(5190)(5191)(5193)(6981)
Motor is 0.9A, 7000RPM, AC 110/125V, 90 watt, 50/60Hz
Fits most Kenmore machines where the motor is mounted on the out-side/on the back of the machine.
Three mounting holes drilled: two mounting holes measure 2 7/16" apart (in-line) for hinged type bracket (#3081). Additional offset hole drilled for "T" mount adjustable bracket (#202086) and bracket with terminal (250977). You must use your existing bracket.
Motor comes with two mounting screws, #820 belt, motor pulley and attached 8" lead wire.
Compatible with "motor maintence kit #4013/4015"
This item is Freight Intensive (F/I), $8.95 is the basic S&H for ALL Freight Intensive (F/I) items
 

   
Motor Maintenance Kit #4013/4015
$12.95
Kit consists of 2 brush caps, 2 carbon brushes with spring, motor mounting bolt (boss) with one flat washer and one lock washer.
This kit is for motors we sell on our web site including:
Motor #159966, Motor #50001 / (Replacement motor ONLY) 39963; also for motors 270-B, NA35K/L
This kit will NOT fit Kenmore / Singer original motors- ONLY the "Replacement motors we sell on the web site.
We cannot predetermine if all parts in this kit are compatible with your particular set-up.
ADD BASIC S&H
 

   
Kcabinetbolt.gif Kenmore Cabinet Mounting Bolt (original)***
$0.00
SOLD OUT / NO LONGER AVAILABLE
Please see "Singer & Kenmore Mounting Kit #969006", see below for an alternative mounting system.
Mounting bolt for cabinets (ORIGINAL) has been removed from a machine in our inventory. Thumb type screw with attached washer (screw portion aproximately 1" long).
ADD BASIC S&H
 

   
Kcarryingcasebolt.gif Kenmore Carrying Case Mounting Bolt (original)***
$0.00
SOLD OUT / NO LONGER AVAILABLE
Please see "Singer & Kenmore Mounting Kit #969006", see below for an alternative mounting system.
Mounting bolt for carrying cases (ORIGINAL) has been removed from a machine in our inventory. Thumb type screw with attached washer (screw portion aproximately 5/8" long).
ADD BASIC S&H
 

   
Kmountingkit969006.gif Singer / Kenmore Mounting Kit #969006
$12.95
Fits: Kenmore / New Home 656A
So-Fro 9102, 9106, 9112, 9314, 9315
White 3900, 5800
Singer 5170, 5180
SEE ABOVE: Kenmore Cabinet Mounting Bolt (original) or Kenmore Carrying Case Mounting Bolt (original)
New style mounting kit for mounting a free-arm machine into a free-arm cabinet.
Comes with two each:
Bolts, 2 1/2" long (28 thread count)
Lock nuts
Washers
If you need you can cut to make bolt shorter for some carrying case models
ADD BASIC S&H
 

   
tweezersTWE6p.gif Tweezers #TWE6
$3.95
Top quality tweezers with guide pin
6" long with bent point design.
The best tool in your accessory box. Ideal for threading needles on sewing machines and needles and loopers on sergers. Many other practical sewing uses: removing thread and lint build-up from small areas in the sewing machine, pulling out unwanted stitches, etc.
ADD BASIC S&H
 

   
4inchscissors.jpg 4 Inch Embroidery Scissors
$6.95
4" embroidery scissors
Fine sharp point ideal for close work in small areas
CAUTION: As in most cutting instruments the point and blades are sharp and should be handled ONLY by adults for cutting and craft use.
ADD BASIC S&H
 

   
opermankitp.gif Operator Maintenance Kit
$12.95
*High quality oil in refillable extendable spout. Long neck spout style of oiler #NK2 may vary depending on availability.
*Lubricant for gears
*Lint brush
*Extra fine quality screw driver for tension adjustments
*2 strips of crocus cloth for removing burs on hook, etc.
*6" abrasive cord #52 for removing burs in and around needle plate, etc.
*Oil and lubricant instructions pamphlet for various models
ADD BASIC S&H
 

   
SPulleyMetal419.jpg Metal Motor Pulley #419
$5.95
Most common motor belt pulley, 1/4" in-side diameter hole
Fits many motors including NA35K, NA35L, 159966, Kenmore motors: 39963, 50001, 1290, 2139, 2145, 5150, 5152, 5163, 5168, 5187, 5195, 34600, YM-40, 50004, 50005, DP50012, 1120, 202085 ,2142 ,5120, 5122, 5150R, 5151, 5154, 5156, SR-5159, 5162, 5167, 5169, 5186, 5190, 5191, 5193, 6981
Can fit older style Singer 66 and other Singer models that used a pulley where the pulley screw went through the motor shaft. This new style pulley does not have this type screw however this pulley can work, it has a set screw that tightens to the motor shaft but does not screw into the motor shaft. The hub with the set screw will be positioned towards the motor so the belt will line up with the hand wheel.
ADD BASIC S&H


   
KBobbinWinder57742B.jpg Kenmore Bobbin Winder #57742B (Bin1068)
$15.95
Kenmore bobbin winder complete.
Fits Kenmore: 158.17910, 158.17911, 158.1792184, 158.1792280
ADD BASIC S&H


   
CluchKnob1129.jpg Cluch Knob #254 (metal)(000254)(bin1129)
$12.95
#254(256/852 Singer),(153 Kenmore),(100042002 Brother)
This knob can replace #44468-447 which is NLA.
This part may be provided new or used depending on present inventory.
For additional Vintage Handwheels & Clutch Parts go to this link.
ADD BASIC S&H


   
CluchWasher1130.jpg Clutch Washer (standard) #002020SR (bin1130)
$3.95
(2020)(44464)(171502)(810)(13KM)(X50792051 Brother)
Fits many Singer, Kenmore, Brother, White and most other models.
May be supplied in black or silver depending on inventory.
How to Reset the Clutch Assembly
ADD BASIC S&H


   
CluchScrew1131.jpg Clutch Stop Motion Screw #248/851 Singer (bin1131)
$3.95
(141914-892 Singer)(154 Kenmore)(100043053 Brother)
Stop motion screw fits many clutch knobs #254
ADD BASIC S&H


   
WheeledBagCarryingCase.jpg Free Arm Sewing Machine / Serger Wheeled Bag Case
$49.95
CLOSE-OUT PRICE $49.95
Regular price $69.95
Ideal for totting or rolling your portable free-arm sewing machine or serger back and forth to classes.
Locking retractable handle and heavy duty cushioned strap.
Tow outside compartments ideal for foot control, manual and accessories.
Approximately 9" wide, 18" long and 13" high.
NOT intended for shipping or airport check-in baggage with the sewing machine inside.
$15.00 is the basic S&H for ALL CARRYING CASES, they do NOT qualify for Free S&H



   
SingerNeedle3Pack.jpg Singer Needles - 3 Pack 11-14-16 "ON SALE NOW"
$11.95
Regular price $14.85
Three packs of needles 10 per pack.
One 10 pack of size 11 for light weight fabrics.
One 10 pack of size 14 for medium weight fabrics.
One 10 pack of size 16 for heavy weight fabrics.
Singer "TOP QUALITY" needles with sharp points for maximum needle power penetration, hardened for durability, polished for smooth operation and less heat build up.
Singer needles for Singer and most other sewing machines.
Packaging may vary depending on present inventory.
ADD BASIS S&H


We sell hundreds of parts a day all over North America. Our number one goal is to provide our customers with functional working replacement parts at the most competitive prices. There have been many sewing machine manufacturers over the years, most of course no longer exist and most companies no longer manufacture their own replacement parts.
Most of our replacement parts are new and after market parts, some used or refurbished depending on availability. We must rely on many sources to fill the tremendous need. Our choices are always made with your satisfaction in mind...
John



Email: sewingmachine221sale@pop.bizland.com
This web site is owned and operated by:
Discount Sewing Machine Service 2000
Site contains material that are trademark TM and servicemark SM.
All material is for personal use only and is not to be mass produced.
Pages constructed and maintained by Kas